Remove the spindle head covers.
Install the spindle lock tool (T-1635) onto the spindle.
Locate the spindle solenoid. Remove the quick connect, and orifice .
Install the T fitting , orifice , and quick connect  (parts B,C,& D) as illustrated. Install the removed components  on top of the T fitting.
Rout the new 5/32 clear hose from the new fitting on the spindle solenoid to the TSC union in the spindle head.
Unplug the power to the TSC/TAB Union Solenoid. Unplug and cut off the grey hose in the CALM panel and discard it.