×

Sökresultat

Web Pages

Images

    • <
    • 1
    • >
  • maskiner
    • Haas VMT-serien
      VMT-serien
      • VMT-serien
      • VF-serien
      • UMC-serien
      • VR-serien
      • VMC med palettväxlare
      • Minimill
      • VM-serien
      • Drill/Tap/Mill-serien
      • Toolroom-serien
      • Compact Mill
      • Portalfräsar
      • VMT-serien
      • VS-serien
      • Fräsar med dubbla pelare
      • Desktop Mill
      • Portalrobot för CNC-fräs
      • Kompakt Portalrobot för fräsar
    • Product Image
      Fleraxlade lösningar
      • Fleraxlade lösningar
      • Svarvar med Y-axel
      • 5-Axis Mills
    • Haas-svarvar
      Svarvar
      • Svarvar
      • ST-serien
      • Dubbla spindlar
      • Toolroom-svarvar
      • CL-serien
      • Haas stångmagasin V2
      • Portalrobot till CNC-svarv
    • Haas horisontalfräsar
      Horisontalfräsar
      • Horisontalfräsar
      • Horisontella fleroperationsmaskiner/ 50-kona
      • Horisontella fleroperationsmaskiner/ 40-kona
    • Haas rundmatningsbord och indexerare
      Rundmatningsbord och indexering
      • Rundmatningsbord och indexering
      • Rundmatningsbord
      • Indexerare
      • 5-axliga rundmatande produkter
      • Extra stora rundmatningsbord
    • Product Image
      Automatiseringssystem
      • Automatiseringssystem
      • Robotsystem
      • Portalrobot för CNC-fräs
      • Palettpool
      • Haas stångmagasin
      • Models
    • SNABBLÄNKAR Specialserie  Specialserie 
      HAAS KARRIÄRMÖJLIGHETER HAAS KARRIÄRMÖJLIGHETER Bygg och prissätt BYGG-OCH-SE PRIS PRISLISTA PRISLISTA NYHETER NYHETER DIN FÖRSTA CNC-MASKIN DIN FÖRSTA CNC-MASKIN HAAS SIX PACK HAAS SIX PACK
      KÖPA VERKTYG
      • Bygg och prissätt en Haas
      • Prislista
      • Finns i lager
      • CNCA-finansiering
      VILL DU KOMMA I KONTAKT MED OSS?

      Din Haas-leverantör (HFO) kan besvara alla dina frågor och diskutera vilka lösningar som är bäst för dig.

      CONTACT YOUR DISTRIBUTOR >
  • Alternativ
    • Product Image
      Spindlar
      • Spindlar
    • Product Image
      Verktygsväxlare
      • Verktygsväxlare
    • Product Image
      4:e | 5:e-axlade
      • 4:e | 5:e-axlade
    • Product Image
      Revolvrar och roterande verktyg
      • Revolvrar och roterande verktyg
    • Product Image
      Sondering
      • Sondering
    • Haas – Hantering av spån och kylmedel
      Hantering av spån och kylmedel
      • Hantering av spån och kylmedel
    • Haas styrsystem
      Haas styrsystem
      • Haas styrsystem
    • Product Image
      Produktalternativ
      • Produktalternativ
    • Product Image
      Verktyg och fixturtillbehör
      • Verktyg och fixturtillbehör
    • Product Image
      Uppspänningsanordning
      • Uppspänningsanordning
    • Product Image
      5-axliga lösningar
      • 5-axliga lösningar
      • 5 Easy Steps to 5-Axis
    • Product Image
      Automatisering
      • Automatisering
    • SNABBLÄNKAR Specialserie  Specialserie 
      HAAS KARRIÄRMÖJLIGHETER HAAS KARRIÄRMÖJLIGHETER Bygg och prissätt BYGG-OCH-SE PRIS PRISLISTA PRISLISTA NYHETER NYHETER DIN FÖRSTA CNC-MASKIN DIN FÖRSTA CNC-MASKIN HAAS SIX PACK HAAS SIX PACK
      KÖPA VERKTYG
      • Bygg och prissätt en Haas
      • Prislista
      • Finns i lager
      • CNCA-finansiering
      VILL DU KOMMA I KONTAKT MED OSS?

      Din Haas-leverantör (HFO) kan besvara alla dina frågor och diskutera vilka lösningar som är bäst för dig.

      CONTACT YOUR DISTRIBUTOR >
  • Why Haas
      Upptäck skillnaden med Haas
      Varför Haas MyHaas Utbildningsgrupp Industri 4.0 Haas-certifiering Kundreferenser
  • Service
      Välkommen till Haas Service
      SERVICEHEMSIDA Bruksanvisningar Så här går det till Felsökningsguider Förebyggande underhåll Haas-detaljer Haas-verktyg Video
  • Videor

    • HFO Sweden
      • HFO Sweden
      • Om oss
      • Service
      • Utbildning
      • Finansiering
      • Event
      • Demomaskiner
      • Kontakta Oss
    • SNABBLÄNKAR Specialserie  Specialserie 
      HAAS KARRIÄRMÖJLIGHETER HAAS KARRIÄRMÖJLIGHETER Bygg och prissätt BYGG-OCH-SE PRIS PRISLISTA PRISLISTA NYHETER NYHETER DIN FÖRSTA CNC-MASKIN DIN FÖRSTA CNC-MASKIN HAAS SIX PACK HAAS SIX PACK
      KÖPA VERKTYG
      • Bygg och prissätt en Haas
      • Prislista
      • Finns i lager
      • CNCA-finansiering
      VILL DU KOMMA I KONTAKT MED OSS?

      Din Haas-leverantör (HFO) kan besvara alla dina frågor och diskutera vilka lösningar som är bäst för dig.

      CONTACT YOUR DISTRIBUTOR >
  • Kontakta oss

My Cart
MyHaas Välkommen
!
Haas Tooling Gästorderhistorik MyHaas/HaasConnect Logga in Registrera Haas Tooling Mitt konto Order History Return History MyHaas/HaasConnect Logga ut Välkommen Mina maskiner Senaste aktivitet Mina offerter Mitt konto Mina användare Logga ut
Hitta en återförsäljare
  1. Välj språk
    1. English
    2. Deutsch
    3. Español - España
    4. Español - Méjico
    5. Français
    6. Italiano
    7. Português
    8. Český
    9. Dansk
    10. Nederlands
    11. Magyar
    12. Polski
    13. Svenska
    14. Русский
    15. Türkçe
    16. 中文
    17. Suomi
    18. Norsk
    19. الإنجليزية
    20. български
    21. Hrvatski
    22. Ελληνικά
    23. Română
    24. Slovenský
    25. Slovenščina
    26. 한국어
    27. 日本語
Search
×

Sökresultat

Web Pages

Images

    • <
    • 1
    • >

Robot Systems

Product Image

LADDA NER EN NYSAMMANSTÄLLD OFFERT PÅ DIN HAAS-MASKIN

HÄMTA DIN OFFERT


VAD HINDRAR DIG?

ROBOTAR

  • ROBOTPAKET
  • VIDEO OM ROBOTINSTALLERING
  • KUNDREFERENSER
  • FÖRDELAR MED HAAS ROBOT
  • BILDGALLERI

Vi är alltid beredda att svara på frågor om hur verkstaden kompletteras med en robot. Den tar faktiskt inte så stor plats, den kostar inte en förmögenhet och integrationen tar inte flera veckor. Se dessa videoinslag för mer information.

UTRYMMESEFFEKTIVT

KOSTNADSEFFEKTIVT

ENKEL ATT INTEGRERA

ENKEL ATT LÄRA SIG

Recently Updated

Haas Robotpaket


Mer information | Bygg och se pris

Haas Robotpaket 1

Robotsystem med 7 kg kapacitet

Levereras med följande Haas-maskiner:

VF-1 och VF-2

ST-10 till ST-28

UMC-500/SS

DT- och DM-serierna

Robotpaket 1 – Klicka för att se tillgängliga maskiner

Haas DM-2

DM-2

CNC Drill/Mill Center with 28" x 16" x 15.5" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas DT-2

DT-2

CNC Drill/Tap Center with 28" x 16" x 15.5" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas VF-2SS

VF-2SS

Super-Speed CNC Vertical Mill with 30" x 16" x 20" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas ST-10

ST-10

CNC Lathe with 12" x 16" max capacity and 1.75" bar capacity

    ENDAST CNY
Läs mer … Bygg och prissätt
Product Image

ST-15

CNC Lathe with 12" x 16" max capacity and 2.5" bar capacity

    ENDAST CNY
Läs mer … Bygg och prissätt
SE MASKINER MED ROBOTPAKET 1
Mer information | Bygg och se pris

Haas Robotpaket 2

25 kg Robotsystem

Levereras med följande Haas-maskiner:

VF-1 till VF-5

ST-20 till ST-35

UMC-500/SS till
UMC-1000/SS

Robotpaket 2 – Klicka för att se tillgängliga maskiner

Haas VF-2SSYT

VF-2SSYT

Super-Speed CNC Vertical Mill with 30" x 20" x 20" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas VF-3SS

VF-3SS

Super-Speed CNC Vertical Mill with 40" x 20" x 25" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas VF-4

VF-4

CNC Vertical Mill with 50" x 20" x 25" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas ST-20Y

ST-20Y

Y-Axis CNC Lathe with 11.75" x 22.5" max capacity and 2.5" bar capacity

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas ST-30Y

ST-30Y

Y-Axis Mid-Size CNC Lathe with A2-6 spindle nose and 3.0" (76 mm) bar capacity

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas UMC-500

UMC-500

5-Axis CNC Vertical Machining Center with 24" x 16" x 16" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
SE MASKINER MED ROBOTPAKET 2
Mer information | Bygg och se pris

Haas Robotpaket 3

Robotsystem med 50 kg kapacitet

Levereras med följande Haas-maskiner:

VF-1 till VF-6+

ST-30 till ST-35

Robotpaket 3 – Klicka för att se tillgängliga maskiner

Product Image

VF-6SS

Super-Speed CNC Vertical Mill with 64" x 32" x 30" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas VF-740

VF-7/40

CNC Vertical Mill with 84" x 32" x 30" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas VF-850

VF-8/50

CNC Vertical Mill with 64" x 40" x 30" travels

    ENDAST CNY
Läs mer … Bygg och prissätt
Haas ST-30LY

ST-30LY

Long-Bed CNC Lathe with 13.75 x 62.5" max capacity and 3.0" bar capacity

    ENDAST CNY
Läs mer … Bygg och prissätt
SE MASKINER MED ROBOTPAKET 3

HAAS GÖR ROBOTISERINGEN ENKEL

✓ Helt integrerade robotpaket för ”plug and play”-uppstart

✓ Maskin + robot + integration + enskild styrning + HFO-service

✓ Alltsammans genom ett telefonsamtal

Läs mer
Recently Updated

VAD INGÅR I ETT HAAS-ROBOTPAKET?


SNABB, PROBLEMFRI INSTALLATION


Det har aldrig varit lättare att lägga till en 6-axlig robot till en Haas-maskin. Haas Robotpaket gör det möjligt för dig att ställa in och styra roboten direkt från Haas styrsystem utan komplicerade PLC-anslutningar eller tredjepartsintegrator.

ALLA TILLVAL INGÅR


Varje Haas Robotpaket innehåller allt du behöver för automatisk maskinbetjäning: 6-axlig robot, programvarugränssnitt för direkt styrning från Haas styrsystem, elektrisk gränssnittslåda, säkerhetsstängsel och alla magnetventiler, fästelement och kablar som behövs.

ENKEL INSTALLATION


Haas Robotpaket är de enklaste och snabbaste sätten att konfigurera i branschen, och du behöver inte en 3:e parts integratör. Din lokala HFO gör installationen åt dig på bara några timmar, snarare än de dagar eller veckor som behövs för andra system.

✓ INGA KOMPLEXA ANSLUTNINGAR

✓ INGEN TREDJEPARTSINTEGRATION

✓ INGA EXTRAKOSTNADER

✓ DIREKT HAAS STYRSYSTEM

robot

Enkel ”plug-and-play”-installation


Ingen extern integratör behöver anlitas. Allt kan installeras av HFO/kund och styrs direkt med Haas styrsystem och pekskärmen på maskinens fjärrmanipulator, och ett enkelt och lättanvänt gränssnitt som liknar APL.

ROBOT SETUP VIDEOS

STEP-BY-STEP ROBOT SETUP VIDEOS 

PART 1: INITIAL SETUP

To get started, navigate to the Devices tab on the Current Commands page. If you have a Haas Robot Package installed, you will have an additional tab, the Robot tab. The Robot tab contains three subtabs: Frames, Jogging, and Setup. Starting with the Setup tab, follow the prompts for setting up the robot.  

To set up the Robot, hit the E-stop on the machine and power-on your robot control. Then, select F1; after a few moments, you will see the Robot connected, and the info updated. Now, release the E-stop and hit reset. You have now connected the Robot to your Haas Machine. 

Watch the video above to set up the basic parameters for your Robot, from setting axis speeds and gripper weight, to setting the positions for the Robot. 

 

CLICK HERE FOR MORE DETAILS.

PART 2: SAFETY ZONES

Safety Zones are used to ensure your Robot stays within a specific boundary box to help limit the possibility of crashing into your machine. 

First, align your robot to your cage and to the machine. Then, measure your Robot’s distance from the edge of your workspace. All dimensions need to be in millimeters (mm). After measuring all dimensions, you will need to set up your work zone by logging in to the HMI Pendent. You will need to connect the Robot to a computer with internet access via the ethernet cable. 

Watch the video above for step-by-step set up of your Robot’s safety zones, and how to use the HMI Pendent. 

CLICK HERE FOR MORE DETAILS.

PART 3: TEMPLATE SETUP

Set up your parts table using the Template tab. The Template tab is a subtab of the Automatic Part Loader under the Devices tab in Current Commands. This is where you will tell your robot how your parts table is set up. 

Start with Sequence Type, where you can choose between Simple and Custom Sequence. If you are a beginner, start with Simple mode. Once the Sequence type is selected, follow the control’s prompts and intuitive instructions to work through the remaining steps to set up your parts table. 

Watch the video above to step through the operations to set up the parts table for your Robot. 

PART 4: LOAD PARTS TAB

Learn how to load parts into your machine using the Load Parts tab. You will first set up your robot speed. Next, you will initiate Handle Jog mode and set up the initial part pick up location. Once this is set, click F2 to set the reference position. Now, work down the different setup tabs to set the pick-up and drop-off spots for loading your part into your machine. 

Watch the video above to set up the movements of your Robot to load your parts. 

PART 5: UNLOAD PARTS TAB

Learn how to use the Unload Parts tab to unload your parts from the machine. The first step is to select from where you wish the Robot to pick up your part, either the main spindle chuck or the sub-spindle chuck on a lathe, or any workholding you have set up on a mill. 

Helpful hint: Record the first position of the finished part pick-up motion in the same position as the last recorded position of ready motion to make a smooth transition between these two motions. 

Watch the video above to set up the movement of your Robot to pick up your finished parts. 

PART 6: RUN JOB & APL SCHEDULER

Now, you are able to reap the benefits of your setup, and allow the robot to run your jobs unattended. Simply navigate to the Run Job tab, and load the job you would like to run. On this tab, you are able to see the current part being machined, the next part to be machined, the number of completed parts, and the total number of parts to be completed. On the APL Scheduler tab, you are able to schedule multiple jobs in sequence. Once the job is loaded, you are able to able to assign the jobs an order number, which corresponds to the order in which the job will be run.

Watch the video above to run and schedule your robot jobs.

PART 7: CUSTOM SEQUENCES

Custom sequence types allow you to create your own set of motions, and implement them into your part program, instead of using the pre-programmed APL sequences in Simple Mode. To turn on custom sequences, simply navigate to the Template tab, and make sure the Sequence Type is set to Custom Sequence.

Watch the video above to learn how to set up and use custom sequences.

The Haas Guide to Automation: ROBOTS

READ THE GUIDE
Recently Updated

Se det med egna ögon


En bild säger mer än tusen ord. Ta en titt i det här bildgalleriet och se Haas robotpaket ur olika vinklar.

SE GALLERIET

CUSTOMER TESTIMONIALS AND VIDEOS

EVERYTHING CAN BE SET UP BY YOUR HFO OR YOU. NO 3RD-PARTY INTEGRATOR IS NEEDED. 

SEE HOW CUSTOMERS AROUND THE WORLD ARE USING THE HAAS ROBOT 

MASTEQ

See how Masteq Tool & Engineering optimized their Haas robot setup with multiple vises and a custom part drop-off point.

“Haas provides an unparalleled value in the market today. The technology, performance, and reliability are why, when we’re in the market for new machines, we always start with Haas!” 

– Mark B. Anderson, Owner - Masteq Tool & Engineering, LLC and Masteq Manufacturing, LLC.

AMERICAN TORCH TIP

See how American Torch Tip is using automation to increase productivity, and give them a competitive edge.

Recently, American Torch Tip installed a turning cell with three Haas ST-20Y CNC lathes with sub-spindles, each set up with automation for lights out production. Two of the Haas ST-20Y CNC lathes are loaded by Haas Automatic Parts Loaders, while the third is loaded by a Haas Robot Package. Learn how this installation is helping a leading manufacturer of torches gain a competitive edge post-pandemic.

“We finally bought one . . . [Robot Package] and that was nice, because it was all plug-and-play.” 
– Jack Walters, President, American Torch Tip Co.

SOUTHLAND FABRICATION

Southland Fabrication made easy work of setting up their Haas Robot Package 1, allowing them to automate their part-loading process.

“Southland has been very pleased with the robot. We’ve run into virtually no issues regarding the robotic arm, and it replicates as a robot should. We’re excited to get the other two robotic arms up and running, and having three arms running seamlessly, pumping out product.” 
– Andy Wood, Mechanical Engineer/CNC Programmer, Southland Fabrication

KB PRECISION, LLC

DYNAMIC MANUFACTURING & ENGINEERING

See how simple it is to
get automated

    The 2021 Catalog on Haas Automated Systems - Check it out!

Recently Updated

Har du fortfarande frågor? Fråga! Vi kommer att kontakta dig inom kort.


Var så specifik som du kan, så att vi kan hjälpa dig att hitta den bästa automationslösningen för din produktion.

Loading

Komplettera din robot med en ny Haas CNC-maskin.

Bygg och prissätt

Vi hjälper dig att hitta rätt maskin till din verkstad.

Kom igång
HITTA EN ÅTERFÖRSÄLJARE
Feedback
Haas Logo

美元价格不包括关税、报关费用、保险费、增值税及运费。
USD prices DO NOT include customs duty, customs fees, insurance, VAT, or freight.

人民币价格包含关税、报关费用、货运保险和增值税, 但不包括运费。
CNY prices include customs duty, customs fees, insurance, and VAT. DOES NOT include freight.

Haas pris inkl. frakt

I detta pris ingår frakt, export- och tullavgifter, försäkring och övriga kostnader som uppstår för leverans till överenskommen plats. Inga övriga obligatoriska kostnader kan läggas till för leverans av Haas CNC-produkt.

HÅLL DIG UPPDATERAD OM TIPS OCH TEKNIK FRÅN HAAS ...

Anmäl dig nu!   

HAAS TOOLING ACCEPTS THE FOLLOWING:

  • Service och support
  • Ägare
  • Serviceförfrågan
  • Bruksanvisning
  • Haas-detaljer
  • Reparationsförfrågan, rundmatningsbord
  • Förinstallationsguider
  • Hitta rätt verktyg
  • Bygg och prissätt en ny Haas
  • Finns i lager
  • Haas prislista
  • CNCA-finansiering
  • Om Haas
  • Karriär
  • Certifieringar och säkerhet
  • Kontakta oss
  • Historik
  • Villkor och bestämmelser
  • Villkor och bestämmelser för Haas verktyg
  • Integritet
  • Garanti
  • Haas nätverk
  • Haas certifieringsprogram
  • Haas Motorsports
  • Gene Haas Foundation
  • Haas gemenskap för teknisk utbildning
  • Evenemang
  • Delta i samtalet
  • Facebook
  • Twitter
  • Flickr
  • YouTube
  • LinkedIn
  • Instagram
  • TikTok
© 2022 Haas Automation, Inc – CNC-verktygsmaskiner

2800 Sturgis Rd., Oxnard, CA 93030 / Toll Free: 800-331-6746
Phone: 805-278-1800 / Fax: 805-278-2255

Meddelande om kakor

Vi använder webbkakor för att förbättra webbplatsens funktionalitet för dig. Vårt meddelande om webbkakor beskriver vilka kakor vi använder, varför vi använder dem och hur du hittar mer information om dem. Vänligen bekräfta ditt medgivande av att vi använder analyskakor. Om du inte medger det kan du fortfarande använda webbplatsen men med begränsad funktionalitet.

Hantera inställningar

Meddelande om kakor

Vi använder webbkakor för att förbättra webbplatsens funktionalitet för dig. Vårt meddelande om webbkakor beskriver vilka kakor vi använder, varför vi använder dem och hur du hittar mer information om dem. Vänligen bekräfta ditt medgivande av att vi använder analyskakor. Om du inte medger det kan du fortfarande använda webbplatsen men med begränsad funktionalitet.

Functional Cookies

Analytics Cookies