HAAS SIX PACK

VIDEO: Haas GM-2-5AX MRZP & Safe Zone Calibration - Haas Automation, Inc.

In this video, Product Specialist John Nelson walks us through the latest process of setting values for the Machine Rotary Zero Point and Safe Zone positions for the GM-2-5AX 5-axis gantry mill.

OPTIONS: Workholding Options

Different workpieces require different workholding! Whether you need platters for your mill, chucks for your lathe, or vises to automate, we got you covered.  Learn more.

CUSTOMER TESTIMONIAL: Innovative Machining Solutions

Brandon Jenkins, founder of Innovative Machining Solutions, talks about their experience with Haas machines. They started out with one Haas VF-2 and have grown their number of machines since. Almost all of their machines have 4th- or 5th-axis rotary tables, such as the HRT160SS, allowing them to reduce setups to stay competitive in the industry. Check out the video to learn more!

CUSTOMER TESTIMONIAL: Aspex CNC

Watch as we take a tour of Aspex CNC, a shop in Poway, CA, specializing in aftermarket automotive, on- and off-road racing, and general job shop work. From their first Haas, an ST-30, to their latest Haas, a UMC-750SS, owner Gary Colle explains why Haas was his first choice for a machine tool, and why Haas continues to be his choice.

MACHINES: Bar Feeder

The Haas Bar Feeder is a simple and affordable way to automate part production on Haas turning centers in order to boost productivity. It is designed and built exclusively for use on Haas turning centers, and connects directly to the Haas control. An innovative rollaway design provides easy access to the rear of the lathe spindle for quick liner adapter and spindle liner changes. Learn more.

CUSTOMER TESTIMONIAL: Discover the Haas Difference in Your Industry

From aerospcace to automotive, we have Haas customers from all types of industries! Check out their stories and more.

INSTAGRAM REPOST: HFO Trident Machine Group

Repost: @hfo_trident_machine_group
With more than 20 Haas CNC lathes and mills in use, it’s no surprise that Haas Automation approached Monte Hoffman at IMTS to be a beta site for the new Haas ST-20Y with sub-spindle. Today, they have 3 of these lathes in use, one of which is featured in this Haas INSIDER, as is their latest addition, a Haas VF-6SS super-speed vertical machining center.

CAREER/EDUCATION: Get Certified!

The Haas CNC Certification Program will help you stand out in the manufacturing industry as a knowledgeable, qualified CNC operator. We provide both mill and lathe certifications! Learn more.

VIDEO: Haas VF-2SSYT and TRT210 Cutting Demo - Haas Automation, Inc.

You might have seen a very similar version of this demo a while back. Ric, the videographer/editor who put together this video originally, was playing around with this “ambient” version, and we decided it would be fun to put it up in the interest of perpetuating the “Music/No Music” debate. Enjoy the sounds of machining.

CUSTOMER TESTIMONIAL: Customer Spotlight - Borg Design - Large VMCs

Borg Design in Hudson, Massachusetts, has large Haas VMCs in their shop to make large parts, giving them the ability to machine the parts in one setup. In this video, Andrew Borg talks about some of the products and parts they machine on their Haas VF-6, VF-9, and VF-11 VMCs. 

OPTION HIGHLIGHT: Programmable Coolant Nozzle

Our Programmable Coolant Nozzle is a multi-position nozzle that automatically directs coolant precisely at the cutting tool. The position of the nozzle is controlled via the program, and set specifically for each tool length – saving operator time by eliminating constant adjustments. Learn more.

SERVICE: Coolant Reference Guide

Need more tips on coolant maintenence and options?  Check out the service reference guide and the coolant option page on our website to learn more.

VIDEO: P-Cool Tricks You Didn’t Know About – Haas Automation Tip of the Day

P-Cool can do a lot more then you think! If you’ve ever set your coolant position to drill a deep hole or mill a pocket, only to have the coolant hit the side of the part and not the tool, there’s a trick for that. How about a macro that automatically positions your P-Cool for every tool in the carousel? Mark shows how to do that, too!

VIDEO: Coolant Pump Simple Maintenance - Haas Automation Service

Orville gives some quick tips on keeping your coolant pump running at full efficiency.

VIDEO: Haas Coolant Tank Oil Skimmer - Option Focus - Haas Automation, Inc.

Keeping tramp oil out of your coolant tank is an important consideration in many shops. Not only does tramp oil degrade the performance of your coolant, but it can also be a breeding ground for bacteria that thrive in oily coolant. Mark shows us how the Haas Oil Skimmer can help keep tramp oil out of your coolant.

VIDEO: Haas Coolant Refill Option - Simple Maintenance - Haas Automation, Inc.

Orville provides some easy-to-perform maintenance tips for keeping your Coolant Refill System running at peak efficiency.

Option Highlight: Robot Integration

• Fully integrated, plug-and-play Robot Packages
• Machine + Robot + Integration + Single Control + HFO Service
• One Call Gets It All

      Learn more!

SERVICE: Preventive Maintenance

Unnecessary machine downtime can eliminate everything you have gained at your shop. That is why at Haas, we like to provide our customers with as much information as possible about keeping their machines up and running. It is not as complicated as you think; with the videos and simple procedures we provide, you can have the confidence that your machine is in top operating condition. Learn more.

HTEC: Machines in Education

We have created specially configured and priced EDU versions of our most popular machines, exclusively for educational institutions. These EDU models make it easier for schools to place machines in their shops to give students hands-on experience. Learn more.

VIDEO: Haas UMC-1500-DUO Cutting Demo - Haas Automation, Inc.

We’ve taken another of our previously released cutting demos, and stripped out the music, so you can focus on the satisfying sounds of fine machining. No, we haven’t given up on background music – we still think it makes most of our videos better – but we’ll be putting out these “ambient” versions from time to time, just for fun.