LIKE WHAT YOU SEE? – CONTACT YOUR HFO TODAY!

– VIRTUAL HAASTEC LIVE –

Contact your local HFO to learn more about how you can put a Haas machine in your shop. 

VF-2SSYT with ROBOT

40 TAPER | 3 AXIS | 12,000 RPM | 30+1 TOOLS

The Haas high-performance Super-Speed vertical machining centers provide the high spindle speeds, fast rapids, and quick tool changes necessary for high-volume production and reduced cycle times. Each SS machine features a 12,000-rpm, inline direct-drive spindle, an ultra-fast side-mount tool changer, and high-speed rapids on all axes. Learn more... VF-2SSYT + ROBOT

ST-10 with ROBOT

6.5" CHUCK | 1.75" BAR | 6000 RPM | 15 HP

Complex parts are perfect for the ST-10, with its generous travels and small footprint. Here, we see a prop shaft being turned between centers. Thanks to the ST-10’s amazing rigidity, we achieved a mirror finish, despite a nearly 10:1 length-to-diameter ratio, without having to slow down on feed/speed. Learn more... ST-10 + ROBOT

VF-2YT with APL

40 TAPER | 3 AXIS | 8100 RPM | 20 TOOLS

Every VF Series vertical machining center provides outstanding features at an excellent price and features a wide range of available options to customize your machine to your exact needs. All Haas machines are designed and built-in Oxnard, California, USA. The VF-2YT offers more Y-axis travel than our standard VF-2. Learn more... VF-2YT +. APL

ST-15Y with APL

8.3" CHUCK | 2.5" BAR | 4000 RPM | 20 HP

The ST-15 is a small-footprint, big-bore turning center that provides an 8" chuck and 2.5" bar capacity, without taking up a lot of shop floor space. This compact turning center is perfect for shops wanting more bar capacity, without the space requirements of a larger machine. Learn more .... ST-15Y + APL

VR-8

HSK-A63 TAPER | 5 AXIS | 20,000 RPM | 50+1 TOOLS

The VR-8 might be the perfect solution when your 5-axis parts get too large to rotate using rotary tables and trunnions. The VR-8 features a large T-slot table that easily supports large workpieces and fixtures, and a powerful 2-axis gimbaled spindle head that provides access to nearly any angle on the part for complex shapes, undercuts, and 5-side machining. Learn more...

GM-2-5AX

HSK 63F TAPER | 5 AXIS | 20,000 RPM | 30+1 TOOLS

Whether you’re machining large airframe components, trimming complex composite structures, or shaping massive layup molds, the GM-2-5AX has the capacity and capability to handle even your largest parts. The 20,000-rpm HSK 63F spindle provides the speed and rigidity you need for long tools and high surface feeds, and the dual-axis spindle head allows you to reach nearly an surface for machining complex contours and difficult features. Learn more...

EC-500/50

50 TAPER | 4 AXIS | 7500 RPM | 50+1 TOOLS

Designed for high-volume production and unattended operation for larger parts and tombstones, the EC-500/50 offers 50-taper power and a large work envelope with the smaller footprint of a 40-taper pallet-changing machine. It features fast rapids, full 4th-axis pallet indexing, and a rear-exit chip conveyor for efficient chip management. Learn more...

VC-400

40 TAPER | 3 AXIS | 8100 RPM | 30+1 TOOLS

The Haas VC-400 takes the familiarity of our popular small VMCs and combines it with the pallet-changing abilities of our EC-400. For high-production work, add a 6-station pallet pool for true “lights out” production. Learn more...

UMC-500 with APL

40 TAPER | 5 AXIS | 8100 RPM | 30+1 TOOLS

The Haas UMC-500 combines the 5-axis capability of our industry-leading UMC-750, with the design improvements of our larger UMC-1000, to create powerful 5-axis solution with a footprint just slightly larger than a VF-2. Learn more ... UMC-500 + APL

UMC-500SS with PALLET POOL

40 TAPER | 5 AXIS | 12,000 RPM | 30+1 TOOLS

The compact footprints of the Haas UMC-500 Series Universal Machining Centers make them perfect solutions for 3+2 machining and simultaneous 5-axis machining of smaller complex parts. The UMC-500SS is equipped with a faster spindle, high-speed tool changer, and high-speed trunnion table to reduce cycle times and boost productivity. Learn more ... UMC-500SS + Pallet Pool

UMC-500SS and MRZP

40 TAPER | 5 AXIS | 12,000 RPM | 30+1 TOOLS

5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. To ensure 3-dimensional accuracy on a 5-axis machine, it’s necessary to establish the zero points for the machine’s rotary axes. On a Haas UMC, that process is easy, using the standard Wireless Intuitive Probing System and our MRZP set-up process.  Learn more...

The MRZP Offsets are settings in the Haas CNC control that tell the control these distances:

• The distance of the tilt axis (B axis) centerline from the X-axis home position
• The distance of the tilt axis (B axis) centerline from the Z-axis home position
• The distance of the table rotary axis (C axis) centerline from the Y-axis home position
• This procedures shows images that use both calibration assemblies

UMC-1500SS-DUO

40 TAPER | 5 AXIS | 12,000 RPM | 30+1 TOOLS

Need to run 5-axis and 3-axis jobs back-to-back, without tearing down either setup? This machine makes it possible. The UMC-1500SS-DUO brings together the 5-axis capabilities of the UMC-750 with an additional VF table to handle 1st or 3rd ops, before and after the 5-axis work is done. Learn more...

UMC-1600-H

50 TAPER | 5 AXIS | 7500 RPM | 30+1 TOOLS

We’ve mounted a massive 630 mm rotary table to the integrated 4th-axis platter of our EC-1600ZT HMC to provide 3+2 positioning and full 5-axis motion for machining large parts. Robust 50-taper cutting, heavy-duty rotary axes, and a large work envelope create a powerful 5-axis solution for the large parts found in the oil & gas, alternative energy, and other heavy industries. 

WHAT IS HAAS TOOLING?

Behind every great machinist is great tooling. At Haas, we pride ourselves on making sure our customers get high-quality products at great prices. With our expansion into tooling, we are bringing the same precision and quality that our machines are known for to the tooling industry.

These tools have been thoroughly tested on Haas machines in our own factory, by expert-level machinists and application engineers. And Haas tools ship directly to you! Learn more...

LIVE INTERVIEW WITH

BOB MURRAY, HAAS AUTOMATION GENERAL MANAGER

Stay tuned to hear what Haas Automation’s General Manager has to say about Haas and the machining industry. Don’t forget to bring your questions for Bob, and comment during the live video. We’ll be monitoring the comments, and he just might answer your question. 

Bob Murray General Manager at Haas Automation