A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >The Haas ST Series high-performance turning centers were designed from the ground up to provide setup flexibility, extreme rigidity, and high thermal stability.
The ST-10 has an extra-small footprint, yet provides a generous work envelope. This machine offers the best performance for the money – the best value – in its class.
Complex parts are perfect for the ST-10, with its generous travels and small footprint. Here, we see a prop shaft being turned between centers. Thanks to the ST-10’s amazing rigidity, we achieved a mirror finish, despite a nearly 10:1 length-to-diameter ratio, without having to slow down on feed/speed.
Swing Diameter | S.A.E | METRIC |
---|---|---|
Max Part Diameter | 16.5 in | 419 mm |
Over Wedge | 16.5 in | 419 mm |
Capacities | S.A.E | METRIC |
---|---|---|
Chuck Size | 6.5 in | 165 mm |
Max Cutting Diameter (varies with turret) | 14.0 in | 356 mm |
Max Cutting Length (without workholding) | 16 in | 406 mm |
Bar Capacity | 1.75 in | 44 mm |
Travels | S.A.E | METRIC |
---|---|---|
X Axis | 7.9 in | 200 mm |
Z Axis | 16.0 in | 406 mm |
Feedrates | S.A.E | METRIC |
---|---|---|
Rapids on X | 1200 ipm | 30.5 m/min |
Rapids on Z | 1200 ipm | 30.5 m/min |
Axis Motors | S.A.E | METRIC |
---|---|---|
Max Thrust X | 3300 lbf | 14679 N |
Max Thrust Z | 3300 lbf | 14679 N |
Spindle | S.A.E | METRIC |
---|---|---|
Spindle Nose | A2-5 | A2-5 |
Max Rating | 15.0 hp | 11.2 kW |
Max Speed | 6000 rpm | 6000 rpm |
Max Torque | 75 ft-lbf @ 1300 rpm | 102 Nm @ 1300 rpm |
Spindle Bore ø | 2.31 in | 58.7 mm |
Turret | S.A.E | METRIC |
---|---|---|
Number of Tools | 12-Station BOT | 12-Station BOT |
OD vs ID Tools | Any Combination (will vary with turret) | Any Combination (will vary with turret) |
Boring Bar Rear Clearance (from back of turret ) | 0.75 in | 19.1 mm |
General | S.A.E | METRIC |
---|---|---|
Coolant Capacity | 30 gal | 114 L |
Air Requirements | S.A.E | METRIC |
---|---|---|
Air Required | 4 scfm @ 100 psi | 113 L/min @ 6.9 bar |
Inline Air Hose | 3/8 in | 3/8 in |
Coupler (Air) | 3/8 in | 3/8 in |
Air Pressure Min | 80 psi | 5.5 bar |
Electrical Specification | S.A.E | METRIC |
---|---|---|
Spindle Speed | 6000 rpm | 6000 rpm |
Drive System | Direct Speed, Belt Drive | Direct Speed, Belt Drive |
Spindle Power | 15.0 hp | 11.2 kW |
Input AC Voltage (3 Phase) - Low | 220 VAC | 220 VAC |
Full Load Amps (3 Phase) - Low | 40 A | 40 A |
Input AC Voltage (3 Phase) - High | 440 VAC | 440 VAC |
Full Load Amps (3 Phase) - High | 20 A | 20 A |
Roll over image to zoom in
If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.
CNC Toolroom Lathe with 16" x 30" max capacity
CNC Lathe with 14" x 16" max capacity and 2.5" bar capacity
All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.