Universal Machines

5-Axis Machining for Everyone

View Models ›

5-Axis Machining is No Longer Out of Reach

Multi-axis machining used to require exotic machines, expensive options, and complex configurations – until now. We’ve removed those barriers, and simplified 5-axis machines for you.

VIEW MODELS

UMC-750

5-Axis CNC Vertical Mill with 30" x 20" x 20" travels

40 Taper
5 Axis
8.1k RPM
40+1 Tool Capacity

UMC-750SS

Super-Speed 5-Axis CNC Vertical Mill with 30" x 20" x 20" travels

40 Taper
5 Axis
15k RPM
40+1 Tool Capacity

UMC-750P

5-Axis Profiling CNC Vertical Mill with 30" x 20" x 20" travels

40 Taper
5 Axis
8.1k RPM
40+1 Tool Capacity

UMC-1000

5-Axis CNC Vertical mill with 40" x 25" x 25" travels

40 Taper
5 Axis
8.1k RPM
30+1 Tool Capacity

UMC-1000SS

Super-Speed 5-Axis CNC Vertical Mill with 40" x 25" x 25" travels

40 Taper
5 Axis
12k RPM
30+1 Tool Capacity

What Do You Want to Create Today?

5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. Haas Universal Machining Centers are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining.

40 Taper
5 Axis
8.1k-15k RPM
30-50 Tool Capacity

CUSTOMIZE YOUR UMC

“Thinking in five axes was new to me, so I took it slowly to start with. The control is the same as the VF-2SS, so it was immediately familiar. Of course, our need for accuracy and capability will only increase over time, but we are in a very good position, now that we have access to an affordable, very good machine like the UMC.”

Matteo Vannini | Workshop Director | Vamec

See the UMC Series in Action

Precision Machining on a UMC-750

The UMC-750 is an affordable solution for 3+2 machining and simultaneous 5-axis work, on a platform that is intuitive and easy to use.

Simplify 3+2 and 5-Axis Machining

Using DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control), you can create your CAM program ahead of time, and then place the workholding and part anywhere on the table, with no need to repost your program!

Single Setup Machining

Typically, this part would require multiple setups and operator handling, but the UMC-750 will produce the finished part in a single setup, with increased accuracy.

Don’t Fear 5-Axis

In the first video in our “Don’t Fear 5-Axis” series, John Nelson explains why 5-axis machining is much simpler than it has ever been, and why any shop can be a 5-axis shop.

See For Yourself

Words can only tell you so much. Check out this gallery of photos to see your Haas from every angle.

VIEW THE GALLERY

Do Even More

From the industry’s most user-friendly control, to our innovative Wireless Intuitive Probing System (WIPS), to our wide selection of productivity-enhancing options, we let you configure your machine so it works for you. After all, you know what you need better than anyone. Learn more about everything Haas has to offer.

Explore Features