A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >
A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >
Haas offers a wide range of VF Series CNC models to match any size and production requirement. Regardless of your needs, there’s a VF just right to meet the demands of your machine shop.
Every VF Series vertical machining center provides outstanding features at an excellent price, and features a wide range of available options to customize your machine to your exact needs. All Haas machines are designed and built in Oxnard, California, USA.
The VF-2YT offers more Y-axis travel than our standard VF-2.
| Travels | S.A.E | METRIC |
|---|---|---|
| X Axis | 30.0 in | 762 mm |
| Y Axis | 20.0 in | 508 mm |
| Z Axis | 20.0 in | 508 mm |
| Spindle Nose to Table (~ max) | 24.0 in | 610 mm |
| Spindle Nose to Table (~ min) | 4.0 in | 102 mm |
| Spindle | S.A.E | METRIC |
|---|---|---|
| Max Rating | 30.0 hp | 22.4 kW |
| Max Speed | 8100 rpm | 8100 rpm |
| Max Torque | 90 ft-lbf @ 2000 rpm | 122 Nm @ 2000 rpm |
| Max Torque w/opt Gearbox | 250 ft-lbf @ 450 rpm | 339 Nm @ 450 rpm |
| Drive System | Inline Direct-Drive | Inline Direct-Drive |
| Taper | CT or BT 40 | CT or BT 40 |
| Bearing Lubrication | Air / Oil Injection | Air / Oil Injection |
| Cooling | Liquid Cooled | Liquid Cooled |
| Table | S.A.E | METRIC |
|---|---|---|
| Length | 36.0 in | 914 mm |
| Width | 18.0 in | 457 mm |
| T-Slot Width | 0.630 in | 16 mm |
| T-Slot Center Distance | 4.92 in | 125 mm |
| Number of Std T-Slots | 3 | 3 |
| Max Weight on Table (evenly distributed) | 3000 lb | 1361 kg |
| Feedrates | S.A.E | METRIC |
|---|---|---|
| Max Cutting | 650 ipm | 16.5 m/min |
| Rapids on X | 1000 ipm | 25.4 m/min |
| Rapids on Y | 1000 ipm | 25.4 m/min |
| Rapids on Z | 1000 ipm | 25.4 m/min |
| Axis Motors | S.A.E | METRIC |
|---|---|---|
| Max Thrust X | 2550 lbf | 11343 N |
| Max Thrust Y | 2550 lbf | 11343 N |
| Max Thrust Z | 4200 lbf | 18683 N |
| Tool Changer | S.A.E | METRIC |
|---|---|---|
| Type | Carousel | Carousel |
| Capacity | 20 | 20 |
| Max Tool Diameter (full) | 3.5 in | 89 mm |
| Max Tool Weight | 12 lb | 5.4 kg |
| Tool-to-Tool (avg) | 4.2 s | 4.2 s |
| Chip-to-Chip (avg) | 4.5 s | 4.5 s |
| General | S.A.E | METRIC |
|---|---|---|
| Coolant Capacity | 55 gal | 208 L |
| Air Requirements | S.A.E | METRIC |
|---|---|---|
| Air Required | 4 scfm @ 100 psi | 113 L/min @ 6.9 bar |
| Inline Air Hose | 3/8 in | 3/8 in |
| Coupler (Air) | 3/8 in | 3/8 in |
| Air Pressure Min | 80 psi | 5.5 bar |
| Electrical Specification | S.A.E | METRIC |
|---|---|---|
| Spindle Speed | 8100 rpm | 8100 rpm |
| Drive System | Inline Direct-Drive | Inline Direct-Drive |
| Spindle Power | 30.0 hp | 22.4 kW |
| Input AC Voltage (3 Phase) - Low | 220 VAC | 220 VAC |
| Full Load Amps (3 Phase) - Low | 70 A | 70 A |
| Input AC Voltage (3 Phase) - High | 440 VAC | 440 VAC |
| Full Load Amps (3 Phase) - High | 35 A | 35 A |
Roll over image to zoom in
If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.
All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.
