Jämför maskiner

1.1 HPB INTRODUKTION

Haas Pressbroms - Introduktion

Revidering A - 07/2026

Overview

HPB 50-5

Detta tillägg till operatörshandboken beskriver de unika egenskaperna och funktionerna hos Haas pressbroms HPB 50-5. Se maskinens styrsystemmanual för information om styrning, programmering och allmän systemfunktionalitet.

HPB 50-5 är en kompakt pressbroms med hög precision, konstruerad för formning av små till medelstora komponenter i tunn plåt.

HPB 170-10

Detta tillägg till operatörshandboken beskriver de unika egenskaperna och funktionerna hos Haas pressbroms 170-10. Se maskinens styrsystemmanual för information om styrning, programmering och allmän systemfunktionalitet.

170-10 är en högkapacitets pressbroms avsedd för bockning av stora och tjocka komponenter i tunn plåt. Den är konstruerad för krävande produktionsmiljöer som kräver högre presskraft, längre bocklängder och jämn prestanda under tunga arbetsbelastningar.

Machine Specifications

Maskinspecifikationer

HPB 50-5

HPB 170-10

Märkström Maximal oljekapacitet:
SAE METRISK SAE METRISK
Maskinvikt 7 496 lb​ 3 400 kg 20 503 lb 9 300 kg
Böjkraft 50 ton 500 kN 170 ton 1 700 kN
Effekt huvudmotor 8,5 kW 18 kW30 A 42 A
120 L 270 L

Dimension Specifications

Maskinspecifikationer

HPB 50-5

HPB 170-10

SAE METRISK SAE METRISK
Mått (L x B x H) 82,7 tum x 52,6 tum x 94,3 tum 2 100 x 1 335 x 2 395 mm 145,7 tum x 65,7 tum x 105,5 tum 3 700 x 1 670 x 2 680 mm
Arbetsbänkens längd 63 tum 1600 mm 126 tum 3 200 mm
Kolumnavstånd 47,2 tum 1 200 mm 102,4 tum 2 600 mm
Halsdjup 9,8 tum 250 mm 15,75 tum 400 mm
Tryckmatarrörelse 6,3 tum 160 mm 7,9 tum 200 mm
Öppningshöjd 18,1 tum 460 mm 18,9 tum 480 mm

Speed Specifications

Maskinspecifikationer

HPB 50-5

HPB 170-10

Skjutblockshastighet
           – Närmande​
    – Böjning
    – Återgång 6,3 tum/s
SAE METRISK SAE METRISK 7,1 tum/s
0-0,39 tum/s
6,3 tum/s		 180  mm/s
0–10 mm/s
160 mm/s
0-0,39 tum/s
5,1 tum/s		 160  mm/s
0–10 mm/s
130 mm/s
X-axelns hastighet 15,75 tum/s 400 mm/s 15,75 tum/s 400 mm/s
X-axelns noggrannhet ±0,008 tum ±0,02 mm ±0,0008 tum" ±0,02 mm
R-axelns hastighet 7,9 tum/s 200 mm/s 7,9 tum/s 200 mm/s
R-axelns noggrannhet ±0,002 tum ±0,05 mm ±0,002 tum ±0,05 mm
Z-axelns hastighet     15,75 tum/s 400 mm/s
Z-axelns noggrannhet     ±0,0008 tum" ±0,02 mm

Material Bending Specifications

Maskinspecifikationer

HPB 50-5

HPB 170-10

SAE METRISK SAE METRISK
Böjtjocklek* – Kolstål ≤ 0,118 tum ≤ 3 mm ≤ 0,236 tum ≤ 6 mm
Böjtjocklek* – Rostfritt ≤ 0,079 tum ≤ 2 mm ≤ 0,138 tum ≤ 3,5 mm
Böjtjocklek* – Aluminium ≤ 0,197 tum ≤ 5 mm ≤ 0,354 tum ≤ 9 mm
Böjvinkelnoggrannhet (hel längd) ±0,5° ±0,5° ±0,5° ±0,5°
Fullständig rakhetsnogrannhet (kolstål) ±0,006 tum ±0,15 mm ±0,006 tum ±0,15 mm
Övergripande böjlängdsnoggrannhet ±0,006 tum ±0,15 mm ±0,006 tum ±0,15 mm

*Beräknas med en böjlängd på 63 tum (1 600 mm)

1.3 FUNKTIONER

HPB-funktioner

Revidering A - 07/2026

HPB Features

[1] Dalem-gränssnitt 

[2] Materialdocka

[3] Materialstopp

[4] Nedre back

[5] Övre stans

[6] Stansfrigöringshandtag 

[7] Ljussändare

[8] Oljetank

[9] Proportionella ventiler 

[10] tryckmatare

[11] Kontrollskåp

[12] Skyddssidodörr

1.4 HANDBOKENS UPPLÄGGNING

How to Use This Manual

To get the maximum benefit of your new Haas machine, read this manual thoroughly and refer to it often.  

IMPORTANT:  Before you operate the machine, read and understand the Operator’s Manual Safety chapter.

DECLARATION OF WARNINGS

Throughout this manual, important statements are set off from the main text with an icon and an associated signal word: “Danger,” “Warning,” “Caution,” or “Note.” The icon and signal word indicate the severity of the condition or situation. Be sure to read these statements and take special care to follow the instructions.

 

Description Example
Danger means that there is a condition or situation that will cause death or severe injury if you do not follow the instructions given.  DANGER: No step. Risk of electrocution, bodily injury, or machine damage. Do not climb or stand on this area.
Warning means that there is a condition or situation that will cause moderate injury if you do not follow the instructions given.  WARNING:  Never put your hands between the tool changer and the spindle head.
Caution means that minor injury or machine damage could occur if you do not follow the instructions given. You may also have to start a procedure over if you do not follow the instructions in a caution statement. CAUTION: Power down the machine before you do maintenance tasks.
Note means that the text gives additional information, clarification, or helpful hints. NOTE:  Follow these guidelines if the machine is equipped with the optional extended Z-clearance table.

1.4 HANDBOKENS UPPLÄGGNING

How to Use This Manual

To get the maximum benefit of your new Haas machine, read this manual thoroughly and refer to it often.  

IMPORTANT:  Before you operate the machine, read and understand the Operator’s Manual Safety chapter.

DECLARATION OF WARNINGS

Throughout this manual, important statements are set off from the main text with an icon and an associated signal word: “Danger,” “Warning,” “Caution,” or “Note.” The icon and signal word indicate the severity of the condition or situation. Be sure to read these statements and take special care to follow the instructions.

 

Description Example
Danger means that there is a condition or situation that will cause death or severe injury if you do not follow the instructions given.  DANGER: No step. Risk of electrocution, bodily injury, or machine damage. Do not climb or stand on this area.
Warning means that there is a condition or situation that will cause moderate injury if you do not follow the instructions given.  WARNING:  Never put your hands between the tool changer and the spindle head.
Caution means that minor injury or machine damage could occur if you do not follow the instructions given. You may also have to start a procedure over if you do not follow the instructions in a caution statement. CAUTION: Power down the machine before you do maintenance tasks.
Note means that the text gives additional information, clarification, or helpful hints. NOTE:  Follow these guidelines if the machine is equipped with the optional extended Z-clearance table.