Compare Machines

4.2 - HCS Modo manual

HCS-80 - Operación manual

Revision A - 06/2026

Under Construction

Manual Mode Interface

1

Para activar el modo Manual, primero gire la perilla externa al icono especificado [1].

2

La página principal debe indicar Modo manual [1] en la parte superior de la pantalla [1].

Los iconos del menú son los siguientes

  1. Alternar rotación de la hoja de sierra
  2. Alternar mesa de avance
    3. Abrazadera de tornillo de banco delantera
  3. Retirar abrazadera de tornillo de banco delantera
  4. Abrazadera de tornillo de banco trasero
  5. Retirar abrazadera de tornillo de banco trasero
  6. Botón de retroceso de la hoja
  7. Botón Avanzar hoja
  8. Botón de avance de la prensa trasera
  9. Botón de retroceso de la prensa trasera

3

4.3 - HCS Modo automático

HCS-80 - Operación automática

Revision A - 06/2026

Under Construction

Automatic Mode Interface

1

To enable Automatic Mode, first turn the external knob to the specified icon.

2

On the touch screen, press [START] to get to the automatic mode main page as seen in Step #7.

To create a new cutting program, select new materials, or adjust cutting parameters, press [NEW USER GUIDE] on the screen.

3

Set the blade parameters.

Enter the blade diameter and select the number of blade teeth. 

Selecting [OTHER SAW BLADES] wiill prompt the user for the blade diameter and custom number of teeth.

4

Select the material shape, material size and material offsets.

Note: When selecting the odd shape icons, the saw will state that special-shaped materials shall be set with manual tool setting, and will require the user to input the cross-secitonal area.

5

The Material Selection interface will prompt the user to select the material that's being cut. 

Select one of the default values, or select [CUSTOMIZE] to change the material.

6

The Customize Material interface allows users to input the material name, saw blade linear speed (ft/min), and chip load (in).

7

The Automatic Mode Main Page will provide the user a brief overview of the program parameters and machine monitoring.

Press the physical [CYCLE START] button to commence automatic sawing. 

4.4 - HCS - Cama extendida

HCS-80 - Operación de cama extendida

Revision A - 06/2026

Under Construction

Extended Bed Operation

1

2

3

4.4 - HCS - Cama extendida

HCS-80 - Operación de cama extendida

Revision A - 06/2026

Under Construction

Extended Bed Operation

1

2

3