Para ativar a o modo manual, gire primeiro o botão externo para o ícone especificado [1].

A página principal deve indicar o modo manual [1] na parte superior do ecrã [1].

Os ícones do menu são os seguintes

1. Alternar rotação da lâmina de serra
2. Alternar tabela de avanço
3. Fixador da prensa dianteira
4. Desfixador da prensa dianteira
5. Fixador da prensa traseira
6. Desfixador da prensa traseira
7. Retrair botão da lâmina
8. Botão de avanço da lâmina
9. Botão de avanço da prensa traseira
10. Botão de retrocesso da prensa traseira

To enable Automatic Mode, first turn the external knob to the specified icon.

On the touch screen, press [START] to get to the automatic mode main page as seen in Step #7.

To create a new cutting program, select new materials, or adjust cutting parameters, press [NEW USER GUIDE] on the screen.

Set the blade parameters.

Enter the blade diameter and select the number of blade teeth. 

Selecting [OTHER SAW BLADES] wiill prompt the user for the blade diameter and custom number of teeth.

Select the material shape, material size and material offsets.

Note: When selecting the odd shape icons, the saw will state that special-shaped materials shall be set with manual tool setting, and will require the user to input the cross-secitonal area.

The Material Selection interface will prompt the user to select the material that's being cut. 

Select one of the default values, or select [CUSTOMIZE] to change the material.

The Customize Material interface allows users to input the material name, saw blade linear speed (ft/min), and chip load (in).

The Automatic Mode Main Page will provide the user a brief overview of the program parameters and machine monitoring.

Press the physical [CYCLE START] button to commence automatic sawing.