MyHaas Dobro došli,
!
Haas Tooling Povijest naloga posjetilaca MyHaas/HaasConnect Prijava Registrirajte se Haas Tooling Moj račun Order History Return History MyHaas/HaasConnect Odjava Dobro došli, Moji strojevi Zadnja aktivnost Moje ponude Moj račun Moji korisnici Odjava
Pronađite zastupnika
  1. Odaberite jezik
    1. English
    2. Deutsch
    3. Español - España
    4. Español - México
    5. Français
    6. Italiano
    7. Português
    8. Český
    9. Dansk
    10. Nederlands
    11. Magyar
    12. Polski
    13. Svenska
    14. Türkçe
    15. 中文
    16. Suomi
    17. Norsk
    18. الإنجليزية
    19. български
    20. Hrvatski
    21. Ελληνικά
    22. Română
    23. Slovenský
    24. Slovenščina
    25. 한국어
    26. 日本語
    27. Українська
  • strojevi Main Menu
    • Vertikalne glodalice Haas Vertikalne glodalice
      Vertikalne glodalice
      Vertikalne glodalice View All
      • Vertikalne glodalice
      • VF serija
      • Univerzalni strojevi
      • VR serija
      • VP-5 prizmatski stroj
      • VMC-ovi za izmjenu paleta
      • Male glodalice
      • Strojevi za modeliranje
      • Centri za bušenje velike brzine
      • Serija strojeva za bušenje/narezivanje/glodanje
      • Alatne glodalice
      • Kompaktne glodalice
      • Serije pokretnih postolja
      • SR Usmjernici za ploče
      • Iznimno veliki VMC strojevi
      • Glodalice s dvostrukim stupcem
      • Upravljački simulator
      • Automatski sustav za dodavanje sirovca za glodalicu
      • VMC/UMC automatski sustav za dodavanje sirovca s bočnim punjenjem
      • Kompaktni APL
    • Product Image Višeosna rješenja
      Višeosna rješenja
      Višeosna rješenja View All
      • Višeosna rješenja
      • Y-osne tokarilice
      • 5-osne glodalice
    • Haas tokarilice Tokarilica
      Tokarilica
      Tokarilica View All
      • Tokarilica
      • ST serije
      • Dva glavnog vretena
      • Serija Box Way
      • Alatne tokarilice
      • Konjić tokarilice
      • Haas dodavač šipke V2
      • Automatski sustav za dodavanje sirovca za tokarilicu
    • Haas horizontalne glodalice Horizontalne glodalice
      Horizontalne glodalice
      Horizontalne glodalice View All
      • Horizontalne glodalice
      • Konus 50
      • Konus 40
    • rotacioni proizvodi i indekseri Haas rotacioni proizvodi i indekseri
      rotacioni proizvodi i indekseri
      rotacioni proizvodi i indekseri View All
      • rotacioni proizvodi i indekseri
      • Okretni stolovi
      • Indekseri
      • 5-osne rotacione jedinice
      • Iznimno velike rotacione jedinice
    • Product Image Sustavi automatizacije
      Sustavi automatizacije
      Sustavi automatizacije View All
      • Sustavi automatizacije
      • Automatizacija glodalice
      • Automatizacija tokarilice
      • Modeli za automatizaciju
    • Haasovi centri za bušenje Desktop strojevi
      Desktop strojevi
      Desktop strojevi View All
      • Desktop strojevi
      • Desktop glodalica
      • Desktop tokarilica
    • Haas oprema za radionice Oprema za radionice
      Oprema za radionice
      Oprema za radionice View All
      • Oprema za radionice
      • Tračna pila
      • Konzolna glodalica
      • Površinska brusilica, 2550
      • Površinska brusilica, 3063
      • Laserski stroj za rezanje
    • BRZE POVEZNICE Posebne serije  Posebne serije 
      EU SERIJE EU SERIJE KONFIGURACIJA I CIJENA | CJENIK KONFIGURACIJA I CIJENA | CJENIK Strojevi na zalihi Strojevi na zalihi ŠTO JE NOVO ŠTO JE NOVO VAŠ PRVI CNC VAŠ PRVI CNC
      ALATI ZA KUPNJU
      • Sastavite i izradite cijenu Haas stroja
      • Cjenik
      • Dostupan inventar
      • CNCA financiranje
      ŽELITE RAZGOVARATI S NEKIM?

      Haas tvornički dućan (outlet) (HFO) može odgovoriti na vaša pitanja i provesti vas kroz najbolje opcije.

      CONTACT YOUR DISTRIBUTOR >
  • Opcije Main Menu
    • Product Image Glavna vretena
      Glavna vretena
      Glavna vretena View All
      • Glavna vretena
    • Product Image Izmjenjivači alata
      Izmjenjivači alata
      Izmjenjivači alata View All
      • Izmjenjivači alata
    • Product Image 4- | 5-osni
      4- | 5-osni
      4- | 5-osni View All
      • 4- | 5-osni
    • Product Image Revolveri i pogonjeni alati
      Revolveri i pogonjeni alati
      Revolveri i pogonjeni alati View All
      • Revolveri i pogonjeni alati
    • Product Image Sondiranje
      Sondiranje
      Sondiranje View All
      • Sondiranje
    • Haas Upravljanje strugotinom i rashladnim sredstvima Upravljanje strugotinom i rashladnim sredstvima
      Upravljanje strugotinom i rashladnim sredstvima
      Upravljanje strugotinom i rashladnim sredstvima View All
      • Upravljanje strugotinom i rashladnim sredstvima
    • Haas upravljačka naprava Haas upravljačka naprava
      Haas upravljačka naprava
      Haas upravljačka naprava View All
      • Haas upravljačka naprava
    • Product Image Opcije proizvoda
      Opcije proizvoda
      Opcije proizvoda View All
      • Opcije proizvoda
    • Product Image Alati i Stezanje i prihvat sirovca
      Alati i Stezanje i prihvat sirovca
      Alati i Stezanje i prihvat sirovca View All
      • Alati i Stezanje i prihvat sirovca
    • Product Image Držač obratka
      Držač obratka
      Držač obratka View All
      • Držač obratka
    • Product Image 5-osna rješenja
      5-osna rješenja
      5-osna rješenja View All
      • 5-osna rješenja
      • 5 Easy Steps to 5-Axis
    • Product Image Automatizacija
      Automatizacija
      Automatizacija View All
      • Automatizacija
    • BRZE POVEZNICE Posebne serije  Posebne serije 
      EU SERIJE EU SERIJE KONFIGURACIJA I CIJENA | CJENIK KONFIGURACIJA I CIJENA | CJENIK Strojevi na zalihi Strojevi na zalihi ŠTO JE NOVO ŠTO JE NOVO VAŠ PRVI CNC VAŠ PRVI CNC
      ALATI ZA KUPNJU
      • Sastavite i izradite cijenu Haas stroja
      • Cjenik
      • Dostupan inventar
      • CNCA financiranje
      ŽELITE RAZGOVARATI S NEKIM?

      Haas tvornički dućan (outlet) (HFO) može odgovoriti na vaša pitanja i provesti vas kroz najbolje opcije.

      CONTACT YOUR DISTRIBUTOR >
  • Why Haas Main Menu
      Otkrijte Haas razliku
    • Zašto Haas
    • MyHaas
    • Edukacijska zajednica
    • Industry 4.0
    • Haas certifikat
    • Svjedočenja kupaca
  • Servis Main Menu
      Dobrodošli u Haas Service
      POČETNA STRANICA SERVISA Priručnici za korisnika Upute za izvršenje Upute za rješavanje problema Preventivno održavanje Haas dijelovi Haas Tooling Videozapisi
  • Videozapisi Main Menu
×

Rezultati pretrage

Web Pages

Images

    • <
    • 1
    • >
MyHaas Dobro došli,
!
Haas Tooling Povijest naloga posjetilaca MyHaas/HaasConnect Prijava Registrirajte se Haas Tooling Moj račun Order History Return History MyHaas/HaasConnect Odjava Dobro došli, Moji strojevi Zadnja aktivnost Moje ponude Moj račun Moji korisnici Odjava
Pronađite zastupnika
  1. Odaberite jezik
    1. English
    2. Deutsch
    3. Español - España
    4. Español - México
    5. Français
    6. Italiano
    7. Português
    8. Český
    9. Dansk
    10. Nederlands
    11. Magyar
    12. Polski
    13. Svenska
    14. Türkçe
    15. 中文
    16. Suomi
    17. Norsk
    18. الإنجليزية
    19. български
    20. Hrvatski
    21. Ελληνικά
    22. Română
    23. Slovenský
    24. Slovenščina
    25. 한국어
    26. 日本語
    27. Українська
×

Rezultati pretrage

Web Pages

Images

    • <
    • 1
    • >

Low Voltage Power Supply (LVPS) - Troubleshooting Guide - NGC

Početna stranica servisa Niskonaponsko napajanje (LVPS) - Vodič za rješavanje problema - NGC

Niskonaponsko napajanje (LVPS) - Vodič za rješavanje problema - NGC

- Preskoči na uzrok - Back to Top
Recently Updated Last updated: 04/25/2025

Low Voltage Power Supply (LVPS) - NGC - Troubleshooting Guide


Revision A - 04/2025

Introduction

The Low Voltage Power Supply (LVPS) in the control is responsible for producing the voltage needed to power the Maincon processor,  and other low voltage components on the machine.

The PSUP PCB supplies 160VDC to the LVPS board at J1 [1]. The LVPS converts this to a regulated +5VDC, +12VDC, and -12VDC signals that are returned to the PSUP PCB from J2 [2]. The LVPS has a fuse [3] to protect the device in case of a short circuit on an component using it for power.

The sections below provide possible symptoms with corrective action, and other information that can be used to troubleshoot issues related to the LVPS on both 15inch and 19inch machines.

Symptom Table

Symptom Cause Corrective Action
Machine fails to boot up The cable coming from the LVPS is disconnected or damaged Inspect the cable and connectors for corrosion or damage. Make sure that the +5V, +12V, and -12V voltages are within range. See section below for measuring the supply voltages.
The LVPS is not supplying correct voltage to the PSUP Measure the voltages on the output of the LVPS and the incoming voltages to the Maincon PCB.
A device powered by the LVPS could have a short circuit. Check the fuse on the LVPS PCB by the 160VDC input. If the fuse is blown, determine what component caused the short circuit before replacing the LVPS.

LVPS Power Distribution

1

The LVPS supplies several different components on the machine.

It supplies the Maincon PCB with power, which is the processor that controls the machine. 

The 12VDC supplied by the LVPS also is used to power the SKBIF PCB in the pendent.

If there are power issues related to these components, troubleshoot the other components before the LVPS:

SKBIF Troubleshooting Guide

Maincon PCB Troubleshooting Guide

PSUP PCB Troubleshooting Guide

2

If troubleshooting an issue where you suspect the maincon isn't receiving power, start by inspecting the maincon. An example of this would be if the machine fails to boot up.

Note: Refer to the Main Processor PCB TSG for both 15inch and 19inch machines for more information on troubleshooting the main processor.

Look for the LED in the upper left region of the Maincon PCB [1]. If the LED's labeled '+5V' is red [1],  then the maincon is receiving power.

3

If the LED's are lit, check the indicator lights on the PSUP PCB.

Verify that all 3 of the LEDs for +5V, +12V, and -12V are lit as shown in the image [1]. 

If they LED's are lit, then the PSUP is receiving the signals from the LVPS. Even if the LED's are lit, measure the voltages to make sure that the voltages are within the acceptable ranges. Measure at both P20 (output to Maincon) and P19 (input from LVPS).

P20:

  • Pin 8 to Pin 7: 4.75 - 5.25VDC
  • Pin 5 to Pin 6: 11.5 - 12.5VDC 
  • Pin 1 to Pin 6: -11.5 - -12.5VDC

P19:

  • Pin 5 to Pin 6: 4.75 - 5.25VDC
  • Pin 1 to Pin 3: 11.5 - 12.5VDC 
  • Pin 4 to Pin 3: -11.5 - -12.5VDC

If all the measured voltages are in range, then the LVPS is functioning as it should and the LVPS should not be replaced. 

If the measurements on P19 are within range, but the measurements on P20 are not, then the PSUP PCB needs to be troubleshot.

Note: If there is no voltage measured on the output of the LVPS, check if the LVPS is receiving 155-162VDC from the PSUP. If the LVPS isn't receiving any power, check the connections/cables going from the PSUP P21 to the LVPS.

LVPS Wiring Diagrams

15 Inch Control - LVPS Wiring Diagram

19 Inch Control - LVPS Wiring Diagram (iPFDM Included)

Recently Viewed Items

You Have No Recently Viewed Items Yet

Povratna veza
Haas Logo

美元价格不包括关税、报关费用、保险费、增值税及运费。
USD prices DO NOT include customs duty, customs fees, insurance, VAT, or freight.

人民币价格包含关税、报关费用、货运保险和增值税, 但不包括运费。
CNY prices include customs duty, customs fees, insurance, and VAT. DOES NOT include freight.

Haas cijena s dostavom

Ova cijena uključuje troškove dostave, izvozne i uvozne carine, osiguranje i sve druge troškove dostave na lokaciju u Francuskoj dogovorenu s vama kao kupcem. Nikakvi drugi obvezni troškovi ne mogu se dodati u cijenu dostave Haas CNC proizvoda.

OSTANITE U TIJEKU S NAJNOVIJIM HAAS SAVJETIMA I TEHNOLOGIJAMA…

Prijavite se sad!   

HAAS TOOLING ACCEPTS THE FOLLOWING:

  • Servis i podrška
  • Vlasnici
  • Zatražite servis
  • Korisnički priručnik
  • Haas dijelovi
  • Zahtjev za popravak okretnog ili okretno nagibnog aparata
  • Vodič prije ugradnje
  • Alati za kupovinu
  • Cijena izrade novog Haasovog stroja
  • Dostupan inventar
  • Cjenik tvrtke Haas
  • CNCA financiranje
  • O tvrtki Haas
  • Izjava DNSH
  • Zapošljavanje
  • Certifikati i sigurnost
  • Obratite nam se
  • Povijest
  • Uvjeti i odredbe
  • Uvjeti i odredbe za Haas Tooling
  • Privatnost
  • Jamstvo
  • Zajednica Haas
  • Haas CNC program certifikacije
  • Motosportovi Haas
  • Zaklada Gene Haas
  • Tehnička edukacijska zajednica tvrtke Haas
  • Događanja
  • Pridružite se razgovoru
  • Facebook
  • X
  • Flickr
  • YouTube
  • LinkedIn
  • Instagram
  • TikTok
© 2025 Haas Automation, Inc – CNC alatni strojevi

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

2800 Sturgis Rd., Oxnard, CA 93030 / Toll Free: 800-331-6746
Phone: 805-278-1800 / Fax: 805-278-2255