MyHaas Tervetuloa,
!
Haas Tooling Rekisteröitymättä tehtyjen tilausten historia MyHaas/HaasConnect Kirjaudu sisään Rekisteröinti Haas Tooling Oma tilini Order History Return History MyHaas/HaasConnect Kirjaudu ulos Tervetuloa, Omat koneeni Viimeisin toiminta Omat tarjoukseni Oma tilini Omat käyttäjäni Kirjaudu ulos
Etsi jälleenmyyjä
  1. Valitse kieli
    1. English
    2. Deutsch
    3. Español - España
    4. Español - México
    5. Français
    6. Italiano
    7. Português
    8. Český
    9. Dansk
    10. Nederlands
    11. Magyar
    12. Polski
    13. Svenska
    14. Türkçe
    15. 中文
    16. Suomi
    17. Norsk
    18. الإنجليزية
    19. български
    20. Hrvatski
    21. Ελληνικά
    22. Română
    23. Slovenský
    24. Slovenščina
    25. 한국어
    26. 日本語
    27. Українська
  • koneet Main Menu
    • Haasin pystyjyrsinkoneet Pystykaraiset jyrsinkoneet
      Pystykaraiset jyrsinkoneet
      Pystykaraiset jyrsinkoneet View All
      • Pystykaraiset jyrsinkoneet
      • VF-sarja
      • Yleiskoneet
      • VR-sarja
      • VP-5 Prismaattinen
      • Palettia vaihtavat pystykaraiset työstökeskukset
      • Minijyrsinkoneet
      • Muottikoneet
      • Suurnopeusporauskeskukset
      • Poraus-/kierteitys-/jyrsintäsarja
      • Työkalujyrsinkoneet
      • Compact Mill -jyrsinkoneet
      • Portaalisarja
      • SR-levyreitittimet
      • Erittäin suuri pystytyöstökeskus
      • Kaksipylväiset jyrsinkoneet
      • Ohjaussimulaattori
      • Jyrsinkoneen automaattinen kappaleenlataaja
      • VMC/UMC Sivulta kuormaava automaattinen kappaleenlataaja
      • Pienet automaattiset kappaleenlataajat
    • Product Image Moniakseliset ratkaisut
      Moniakseliset ratkaisut
      Moniakseliset ratkaisut View All
      • Moniakseliset ratkaisut
      • Y-akselisorvit
      • 5-akseliset jyrsinkoneet
    • Haas-sorvit Sorvit
      Sorvit
      Sorvit View All
      • Sorvit
      • ST-sarja
      • Kaksikarainen
      • Kaavauskehysjohdesorvisarja
      • Työkalusorvit
      • Istukkasorvi
      • Haas-tangonsyöttölaite V2
      • Sorvin automaattinen kappaleen lataaja
    • Haas vaakakaraiset jyrsinkoneet Vaakakaraiset jyrsinkoneet
      Vaakakaraiset jyrsinkoneet
      Vaakakaraiset jyrsinkoneet View All
      • Vaakakaraiset jyrsinkoneet
      • 50-kartioiset
      • 40-kartioiset
    • Haas-pyöröpöydät ja -paikoittimet Pyöröpöydät ja paikoittimet
      Pyöröpöydät ja paikoittimet
      Pyöröpöydät ja paikoittimet View All
      • Pyöröpöydät ja paikoittimet
      • Pyöröpöydät
      • Paikoittimet
      • 5-akseliset pyöröpöydät
      • Erittäin suuret pyöröpöydät
    • Product Image Automaatiojärjestelmät
      Automaatiojärjestelmät
      Automaatiojärjestelmät View All
      • Automaatiojärjestelmät
      • Jyrsinkoneen automaatio
      • Sorvin automaatio
      • Automaatiomallit
    • Haas-porauskeskukset Pöytäkoneet
      Pöytäkoneet
      Pöytäkoneet View All
      • Pöytäkoneet
      • Pöytäjyrsinkone
      • Pöytäsorvi
    • Haasin laitteet konepajaan Osta laitteita
      Osta laitteita
      Osta laitteita View All
      • Osta laitteita
      • Vannesaha
      • Jyrsinkone
      • Pintahiomakone, 2550
      • Pintahiomakone, 3063
      • Laserleikkauskone
    • PIKALINKIT Erikoissarjat  Erikoissarjat 
      EU-SARJA EU-SARJA RAKENNA JA MÄÄRITÄ HINTA | HINNASTO RAKENNA JA MÄÄRITÄ HINTA | HINNASTO Varastossa olevat koneet Varastossa olevat koneet MITÄ UUTTA MITÄ UUTTA YOUR FIRST CNC YOUR FIRST CNC
      TYÖKALUJA OSTAMISEEN
      • Haas-koneen kokoonpano ja hinta
      • Hintalista
      • Varastokoneet
      • CNCA-rahoitus
      HALUATKO KESKUSTELLA JONKUN KANSSA?

      Haas Factory Outlet (HFO) osaa vastata kysymyksiisi ja auttaa sinua parhaan vaihtoehdon valitsemisessa.

      CONTACT YOUR DISTRIBUTOR >
  • Valinnat Main Menu
    • Product Image Karat
      Karat
      Karat View All
      • Karat
    • Product Image Työkalunvaihtajat
      Työkalunvaihtajat
      Työkalunvaihtajat View All
      • Työkalunvaihtajat
    • Product Image 4- | 5-akselin valmius
      4- | 5-akselin valmius
      4- | 5-akselin valmius View All
      • 4- | 5-akselin valmius
    • Product Image Revolverit ja pyörivät työkalut
      Revolverit ja pyörivät työkalut
      Revolverit ja pyörivät työkalut View All
      • Revolverit ja pyörivät työkalut
    • Product Image Mittaus
      Mittaus
      Mittaus View All
      • Mittaus
    • Haasin lastujen ja jäähdytysnesteen hallinta Lastujen ja jäähdytysnesteen hallinta
      Lastujen ja jäähdytysnesteen hallinta
      Lastujen ja jäähdytysnesteen hallinta View All
      • Lastujen ja jäähdytysnesteen hallinta
    • Haas-ohjaus Haas-ohjaus
      Haas-ohjaus
      Haas-ohjaus View All
      • Haas-ohjaus
    • Product Image Tuotevaihtoehdot
      Tuotevaihtoehdot
      Tuotevaihtoehdot View All
      • Tuotevaihtoehdot
    • Product Image Työkalut ja kiinnittäminen
      Työkalut ja kiinnittäminen
      Työkalut ja kiinnittäminen View All
      • Työkalut ja kiinnittäminen
    • Product Image Työkappaleen kiinnitys
      Työkappaleen kiinnitys
      Työkappaleen kiinnitys View All
      • Työkappaleen kiinnitys
    • Product Image 5-akseliset ratkaisut
      5-akseliset ratkaisut
      5-akseliset ratkaisut View All
      • 5-akseliset ratkaisut
      • 5 Easy Steps to 5-Axis
    • Product Image Automaatio
      Automaatio
      Automaatio View All
      • Automaatio
    • PIKALINKIT Erikoissarjat  Erikoissarjat 
      EU-SARJA EU-SARJA RAKENNA JA MÄÄRITÄ HINTA | HINNASTO RAKENNA JA MÄÄRITÄ HINTA | HINNASTO Varastossa olevat koneet Varastossa olevat koneet MITÄ UUTTA MITÄ UUTTA YOUR FIRST CNC YOUR FIRST CNC
      TYÖKALUJA OSTAMISEEN
      • Haas-koneen kokoonpano ja hinta
      • Hintalista
      • Varastokoneet
      • CNCA-rahoitus
      HALUATKO KESKUSTELLA JONKUN KANSSA?

      Haas Factory Outlet (HFO) osaa vastata kysymyksiisi ja auttaa sinua parhaan vaihtoehdon valitsemisessa.

      CONTACT YOUR DISTRIBUTOR >
  • Why Haas Main Menu
      Tutustu Haasin etuihin
    • Miksi Haas
    • MyHaas
    • Koulutusyhteisö
    • Teollisuus 4.0
    • Haas-sertifiointi
    • Asiakkaiden kokemuksia
  • Huolto Main Menu
      Tervetuloa Haas Service
      PALVELUJEN ALOITUSSIVU Käyttöopas Suoritettavia toimenpiteitä Vianmääritysoppaat Ennaltaehkäisevä huolto Haas-osat Haas Tooling Videot
  • Videot Main Menu
×

Haun tulokset

Web Pages

Images

    • <
    • 1
    • >
MyHaas Tervetuloa,
!
Haas Tooling Rekisteröitymättä tehtyjen tilausten historia MyHaas/HaasConnect Kirjaudu sisään Rekisteröinti Haas Tooling Oma tilini Order History Return History MyHaas/HaasConnect Kirjaudu ulos Tervetuloa, Omat koneeni Viimeisin toiminta Omat tarjoukseni Oma tilini Omat käyttäjäni Kirjaudu ulos
Etsi jälleenmyyjä
  1. Valitse kieli
    1. English
    2. Deutsch
    3. Español - España
    4. Español - México
    5. Français
    6. Italiano
    7. Português
    8. Český
    9. Dansk
    10. Nederlands
    11. Magyar
    12. Polski
    13. Svenska
    14. Türkçe
    15. 中文
    16. Suomi
    17. Norsk
    18. الإنجليزية
    19. български
    20. Hrvatski
    21. Ελληνικά
    22. Română
    23. Slovenský
    24. Slovenščina
    25. 한국어
    26. 日本語
    27. Українська
×

Haun tulokset

Web Pages

Images

    • <
    • 1
    • >

Low Voltage Power Supply (LVPS) - Troubleshooting Guide - NGC

Palvelujen aloitussivu Matalan jännitteen virtalähde – Vianetsintäopas – NGC

Matalan jännitteen virtalähde – Vianetsintäopas – NGC

- Siirry syyhyn - Back to Top
Recently Updated Last updated: 04/25/2025

Low Voltage Power Supply (LVPS) - NGC - Troubleshooting Guide


Revision A - 04/2025

Introduction

The Low Voltage Power Supply (LVPS) in the control is responsible for producing the voltage needed to power the Maincon processor,  and other low voltage components on the machine.

The PSUP PCB supplies 160VDC to the LVPS board at J1 [1]. The LVPS converts this to a regulated +5VDC, +12VDC, and -12VDC signals that are returned to the PSUP PCB from J2 [2]. The LVPS has a fuse [3] to protect the device in case of a short circuit on an component using it for power.

The sections below provide possible symptoms with corrective action, and other information that can be used to troubleshoot issues related to the LVPS on both 15inch and 19inch machines.

Symptom Table

Symptom Cause Corrective Action
Machine fails to boot up The cable coming from the LVPS is disconnected or damaged Inspect the cable and connectors for corrosion or damage. Make sure that the +5V, +12V, and -12V voltages are within range. See section below for measuring the supply voltages.
The LVPS is not supplying correct voltage to the PSUP Measure the voltages on the output of the LVPS and the incoming voltages to the Maincon PCB.
A device powered by the LVPS could have a short circuit. Check the fuse on the LVPS PCB by the 160VDC input. If the fuse is blown, determine what component caused the short circuit before replacing the LVPS.

LVPS Power Distribution

1

The LVPS supplies several different components on the machine.

It supplies the Maincon PCB with power, which is the processor that controls the machine. 

The 12VDC supplied by the LVPS also is used to power the SKBIF PCB in the pendent.

If there are power issues related to these components, troubleshoot the other components before the LVPS:

SKBIF Troubleshooting Guide

Maincon PCB Troubleshooting Guide

PSUP PCB Troubleshooting Guide

2

If troubleshooting an issue where you suspect the maincon isn't receiving power, start by inspecting the maincon. An example of this would be if the machine fails to boot up.

Note: Refer to the Main Processor PCB TSG for both 15inch and 19inch machines for more information on troubleshooting the main processor.

Look for the LED in the upper left region of the Maincon PCB [1]. If the LED's labeled '+5V' is red [1],  then the maincon is receiving power.

3

If the LED's are lit, check the indicator lights on the PSUP PCB.

Verify that all 3 of the LEDs for +5V, +12V, and -12V are lit as shown in the image [1]. 

If they LED's are lit, then the PSUP is receiving the signals from the LVPS. Even if the LED's are lit, measure the voltages to make sure that the voltages are within the acceptable ranges. Measure at both P20 (output to Maincon) and P19 (input from LVPS).

P20:

  • Pin 8 to Pin 7: 4.75 - 5.25VDC
  • Pin 5 to Pin 6: 11.5 - 12.5VDC 
  • Pin 1 to Pin 6: -11.5 - -12.5VDC

P19:

  • Pin 5 to Pin 6: 4.75 - 5.25VDC
  • Pin 1 to Pin 3: 11.5 - 12.5VDC 
  • Pin 4 to Pin 3: -11.5 - -12.5VDC

If all the measured voltages are in range, then the LVPS is functioning as it should and the LVPS should not be replaced. 

If the measurements on P19 are within range, but the measurements on P20 are not, then the PSUP PCB needs to be troubleshot.

Note: If there is no voltage measured on the output of the LVPS, check if the LVPS is receiving 155-162VDC from the PSUP. If the LVPS isn't receiving any power, check the connections/cables going from the PSUP P21 to the LVPS.

LVPS Wiring Diagrams

15 Inch Control - LVPS Wiring Diagram

19 Inch Control - LVPS Wiring Diagram (iPFDM Included)

Recently Viewed Items

You Have No Recently Viewed Items Yet

Palaute
Haas Logo

美元价格不包括关税、报关费用、保险费、增值税及运费。
USD prices DO NOT include customs duty, customs fees, insurance, VAT, or freight.

人民币价格包含关税、报关费用、货运保险和增值税, 但不包括运费。
CNY prices include customs duty, customs fees, insurance, and VAT. DOES NOT include freight.

Haasin toimitushinta

Tähän hintaan sisältyvät toimituskulut, vienti- ja tuontitullit, vakuutukset ja muut kulut, jotka koituvat toimituksen aikana sijaintiin Ranskassa, mistä on sovittu sinun kanssasi ostajana. Haas CNC-tuotteen toimitukseen ei saa lisätä muita pakollisia kustannuksia.

PYSY AJAN TASALLA UUSIMMISTA HAASIN VINKEISTÄ JA TEKNOLOGIASTA...

Liity nyt!   

HAAS TOOLING ACCEPTS THE FOLLOWING:

  • Huolto ja tuki
  • Omistajat
  • Pyydä huoltoa
  • Käyttöoppaat
  • Haas-osat
  • Pyöröpöydän korjauspyyntö
  • Esiasennusohjeet
  • Työkaluja ostamiseen
  • Määrittele ja laske uuden Haas-koneen hinta
  • Varastokoneet
  • Haas-hinnasto
  • CNCA-rahoitus
  • Tietoja Haas-yhtiöstä
  • DNSH-lauseke
  • Uramahdollisuudet
  • Sertifioinnit ja turvallisuus
  • Ota yhteyttä
  • Historiaa
  • Ehdot
  • Haas Tooling Ehdot
  • Tietosuoja
  • Takuu
  • Haas-yhteisö
  • Haasin sertifiointiohjelma
  • Haas Motorsports
  • Gene Haas Foundation -säätiö
  • Haasin teknisen koulutuksen yhteisö
  • Tapahtumia
  • Liity keskusteluun
  • Facebook
  • X
  • Flickr
  • YouTube
  • LinkedIn
  • Instagram
  • TikTok
© 2025 Haas Automation, Inc – CNC-koneistuskeskukset

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

2800 Sturgis Rd., Oxnard, CA 93030 / Toll Free: 800-331-6746
Phone: 805-278-1800 / Fax: 805-278-2255