| HAAS PRODUCT |
ROTARY FIT TYPE |
FIT REQUIREMENTS |
| HA2TS |
POSITIVE FIT |
This HA2TS Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HA5C |
POSITIVE FIT |
This HA5C Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HA5C2 |
POSITIVE FIT |
This HA5C2 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HA5C3 |
POSITIVE FIT |
This HA5C3 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HA5C4 |
POSITIVE FIT |
This HA5C4 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HA5CS |
POSITIVE FIT |
This HA5CS Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRC160 |
POSITIVE FIT |
This HRC160 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRC210 |
POSITIVE FIT |
This HRC210 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT160 |
POSITIVE FIT |
This HRT160 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT160-2 |
POSITIVE FIT |
This HRT160-2 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT160SP |
POSITIVE FIT |
This HRT160SP Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT160SS |
POSITIVE FIT |
This HRT160SS Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT210 |
POSITIVE FIT |
This HRT210 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT210-2 |
POSITIVE FIT |
This HRT210-2 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT210M |
POSITIVE FIT |
This HRT210M Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT210SP |
POSITIVE FIT |
This HRT210SP Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT310 |
ALTERNATIVE FIT: CAUTION |
When a HRT310 rotary fits with alternative fixturing, it may fit in that particular Haas mill, but will require a sub-plate or alternate T-slot for proper positioning. |
| HRT310SP |
POSITIVE FIT |
This HRT310SP Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT450 |
ALTERNATIVE FIT: CAUTION |
When a HRT450 rotary fits with alternative fixturing, it may fit in that particular Haas mill, but will require a sub-plate or alternate T-slot for proper positioning. |
| HRTA5 |
POSITIVE FIT |
This HRTA5 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRTA6 |
POSITIVE FIT |
This HRTA6 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| T5C |
POSITIVE FIT |
This T5C Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| T5C2 |
POSITIVE FIT |
This T5C2 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| T5C3 |
POSITIVE FIT |
This T5C3 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| T5C4 |
POSITIVE FIT |
This T5C4 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TR160 |
POSITIVE FIT |
This TR160 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TR160-2 |
POSITIVE FIT |
This TR160-2 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TR200Y |
POSITIVE FIT |
This TR200Y Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TR210 |
POSITIVE FIT |
This TR210 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TR310 |
POSITIVE FIT |
This TR310 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TRT100 |
POSITIVE FIT |
This TRT100 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TRT160 |
POSITIVE FIT |
This TRT160 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TRT210 |
POSITIVE FIT |
This TRT210 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TRT70 |
POSITIVE FIT |
This TRT70 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT100 |
POSITIVE FIT |
This HRT100 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT210HT |
POSITIVE FIT |
This HRT210HT Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HRT210SS |
POSITIVE FIT |
This HRT210SS Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| TH240 |
POSITIVE FIT |
This TH240 Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HA5C-T |
POSITIVE FIT |
This HA5C-T Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HA5C3-T |
POSITIVE FIT |
This HA5C3-T Rotary fits with a traditional setup that is most often used on Haas milling machines. |
| HA5C4-T |
POSITIVE FIT |
This HA5C4-T Rotary fits with a traditional setup that is most often used on Haas milling machines. |
{{ } }}
