MyHaas Bun venit,
!
Haas Tooling Istoricul comenzilor invitatului MyHaas/HaasConnect Înregistrare Înregistrare Haas Tooling Contul meu Order History Return History MyHaas/HaasConnect Deconectare Bun venit, Mașinile mele Cea mai recentă activitate Cotațiile mele Contul meu Utilizatorii mei Deconectare
Găsiți-vă distribuitorul
  1. Selectare limbă
    1. English
    2. Deutsch
    3. Español - España
    4. Español - México
    5. Français
    6. Italiano
    7. Português
    8. Český
    9. Dansk
    10. Nederlands
    11. Magyar
    12. Polski
    13. Svenska
    14. Türkçe
    15. 中文
    16. Suomi
    17. Norsk
    18. الإنجليزية
    19. български
    20. Hrvatski
    21. Ελληνικά
    22. Română
    23. Slovenský
    24. Slovenščina
    25. 한국어
    26. 日本語
    27. Українська
  • mașini Main Menu
    • Frezele verticale Haas Freze verticale
      Freze verticale
      Freze verticale View All
      • Freze verticale
      • Seriile VF
      • Mașinile universale
      • Seria VR
      • VP-5 Prismatic
      • VMC-uri cu schimbarea paletelor
      • Mini Mills
      • Mașini de prelucrare matrițe
      • Centre de găurire de mare viteză
      • Seria pentru găurire/tarodare/frezare
      • Freze pentru sculărie
      • Freze compacte
      • Seriile portal
      • Frezele de tablă SR
      • VMC foarte mare
      • Freze cu coloană dublă
      • Simulator unitate de comandă
      • Încărcătorul automat de piese pentru freză
      • Încărcător automat de piese cu încărcare laterală pentru VMC/UMC
      • Încărcător automat de piese compact
    • Product Image Soluții în mai multe axe
      Soluții în mai multe axe
      Soluții în mai multe axe View All
      • Soluții în mai multe axe
      • Strunguri pe axa Y
      • Freze pe 5 axe
    • Strunguri Haas Strunguri
      Strunguri
      Strunguri View All
      • Strunguri
      • Seria ST
      • Arbore dublu
      • Seria glisieră
      • Strunguri de sculărie
      • Strung cu mandrină
      • Alimentator de bare Haas V2
      • Încărcătorul automat de piese pentru strung
    • Frezele orizontale Haas Freze orizontale
      Freze orizontale
      Freze orizontale View All
      • Freze orizontale
      • Con 50
      • Con 40
    • Mese rotative și indexoare Haas Unități rotative și indexoare
      Unități rotative și indexoare
      Unități rotative și indexoare View All
      • Unități rotative și indexoare
      • Mese rotative
      • Indexoare
      • Unități rotative în 5 axe
      • Unități rotative foarte mari
    • Product Image Sisteme de automatizare
      Sisteme de automatizare
      Sisteme de automatizare View All
      • Sisteme de automatizare
      • Automatizare freză
      • Automatizare strung
      • Modele de automatizare
    • Centre de găurire Haas Mașini desktop
      Mașini desktop
      Mașini desktop View All
      • Mașini desktop
      • Freze desktop
      • Desktop Lathe
    • Echipament pentru atelier Haas Echipament pentru atelier
      Echipament pentru atelier
      Echipament pentru atelier View All
      • Echipament pentru atelier
      • Fierăstrău cu bandă
      • Freză articulată
      • Polizor de suprafețe, 2550
      • Polizor de suprafețe, 3063
      • Mașină de așchiere cu laser
    • LINK-URI RAPIDE Serie specială  Serie specială 
      SERIILE EU SERIILE EU CONFIGURAȚIE ȘI PREȚ | LISTĂ DE PREȚURI CONFIGURAȚIE ȘI PREȚ | LISTĂ DE PREȚURI Mașini în stoc Mașini în stoc CE ESTE NOU CE ESTE NOU PRIMA DVS. MAȘINĂ CNC PRIMA DVS. MAȘINĂ CNC
      CUMPĂRAREA SCULELOR
      • Configurare și preț mașină Haas
      • Listă de prețuri
      • Inventar disponibil
      • Finanțare CNCA
      AVEȚI NEVOIE DE CONSILIERE?

      O reprezentanță Haas (HFO) vă poate răspunde la întrebări și vă poate ghida spre cele mai bune opțiuni.

      CONTACT YOUR DISTRIBUTOR >
  • Opțiuni Main Menu
    • Product Image Arborii principali
      Arborii principali
      Arborii principali View All
      • Arborii principali
    • Product Image Schimbătoare de scule
      Schimbătoare de scule
      Schimbătoare de scule View All
      • Schimbătoare de scule
    • Product Image Axa a 4-a | 5-a
      Axa a 4-a | 5-a
      Axa a 4-a | 5-a View All
      • Axa a 4-a | 5-a
    • Product Image Capete revolver și ansamblul sculelor antrenate
      Capete revolver și ansamblul sculelor antrenate
      Capete revolver și ansamblul sculelor antrenate View All
      • Capete revolver și ansamblul sculelor antrenate
    • Product Image Palpare
      Palpare
      Palpare View All
      • Palpare
    • Gestionarea Haas a șpanului și a lichidului de răcire Gestionarea șpanului și a lichidului de răcire
      Gestionarea șpanului și a lichidului de răcire
      Gestionarea șpanului și a lichidului de răcire View All
      • Gestionarea șpanului și a lichidului de răcire
    • Unitatea de comandă Haas Unitatea de comandă Haas
      Unitatea de comandă Haas
      Unitatea de comandă Haas View All
      • Unitatea de comandă Haas
    • Product Image Opțiunile produsului
      Opțiunile produsului
      Opțiunile produsului View All
      • Opțiunile produsului
    • Product Image Scule și dispozitive de fixare
      Scule și dispozitive de fixare
      Scule și dispozitive de fixare View All
      • Scule și dispozitive de fixare
    • Product Image Sistemul de suport piesă
      Sistemul de suport piesă
      Sistemul de suport piesă View All
      • Sistemul de suport piesă
    • Product Image Soluții în 5 axe
      Soluții în 5 axe
      Soluții în 5 axe View All
      • Soluții în 5 axe
      • 5 Easy Steps to 5-Axis
    • Product Image Automatizare
      Automatizare
      Automatizare View All
      • Automatizare
    • LINK-URI RAPIDE Serie specială  Serie specială 
      SERIILE EU SERIILE EU CONFIGURAȚIE ȘI PREȚ | LISTĂ DE PREȚURI CONFIGURAȚIE ȘI PREȚ | LISTĂ DE PREȚURI Mașini în stoc Mașini în stoc CE ESTE NOU CE ESTE NOU PRIMA DVS. MAȘINĂ CNC PRIMA DVS. MAȘINĂ CNC
      CUMPĂRAREA SCULELOR
      • Configurare și preț mașină Haas
      • Listă de prețuri
      • Inventar disponibil
      • Finanțare CNCA
      AVEȚI NEVOIE DE CONSILIERE?

      O reprezentanță Haas (HFO) vă poate răspunde la întrebări și vă poate ghida spre cele mai bune opțiuni.

      CONTACT YOUR DISTRIBUTOR >
  • Why Haas Main Menu
      Descoperiți diferența Haas
    • De ce Haas
    • MyHaas
    • Comunitate pentru învățare
    • Industry 4.0
    • Certificare Haas
    • Mărturiile clienților
  • Service Main Menu
      Bine ați venit la departamentul de Haas Service
      PAGINA PRINCIPALĂ SERVICE Manualele de utilizare Instrucțiuni de folosire Ghiduri de depanare Mentenanță preventivă Piese Haas Haas Tooling Videoclipuri
  • Videoclipuri Main Menu
×

Rezultatele căutării

Web Pages

Images

    • <
    • 1
    • >
MyHaas Bun venit,
!
Haas Tooling Istoricul comenzilor invitatului MyHaas/HaasConnect Înregistrare Înregistrare Haas Tooling Contul meu Order History Return History MyHaas/HaasConnect Deconectare Bun venit, Mașinile mele Cea mai recentă activitate Cotațiile mele Contul meu Utilizatorii mei Deconectare
Găsiți-vă distribuitorul
  1. Selectare limbă
    1. English
    2. Deutsch
    3. Español - España
    4. Español - México
    5. Français
    6. Italiano
    7. Português
    8. Český
    9. Dansk
    10. Nederlands
    11. Magyar
    12. Polski
    13. Svenska
    14. Türkçe
    15. 中文
    16. Suomi
    17. Norsk
    18. الإنجليزية
    19. български
    20. Hrvatski
    21. Ελληνικά
    22. Română
    23. Slovenský
    24. Slovenščina
    25. 한국어
    26. 日本語
    27. Українська
×

Rezultatele căutării

Web Pages

Images

    • <
    • 1
    • >

Low Voltage Power Supply (LVPS) - Troubleshooting Guide - NGC

Pagina principală Service Sursă de alimentare cu tensiune joasă (LVPS) - Ghid de depanare - NGC

Sursă de alimentare cu tensiune joasă (LVPS) - Ghid de depanare - NGC

- Salt la cauză - Back to Top
Recently Updated Last updated: 04/25/2025

Low Voltage Power Supply (LVPS) - NGC - Troubleshooting Guide


Revision A - 04/2025

Introduction

The Low Voltage Power Supply (LVPS) in the control is responsible for producing the voltage needed to power the Maincon processor,  and other low voltage components on the machine.

The PSUP PCB supplies 160VDC to the LVPS board at J1 [1]. The LVPS converts this to a regulated +5VDC, +12VDC, and -12VDC signals that are returned to the PSUP PCB from J2 [2]. The LVPS has a fuse [3] to protect the device in case of a short circuit on an component using it for power.

The sections below provide possible symptoms with corrective action, and other information that can be used to troubleshoot issues related to the LVPS on both 15inch and 19inch machines.

Symptom Table

Symptom Cause Corrective Action
Machine fails to boot up The cable coming from the LVPS is disconnected or damaged Inspect the cable and connectors for corrosion or damage. Make sure that the +5V, +12V, and -12V voltages are within range. See section below for measuring the supply voltages.
The LVPS is not supplying correct voltage to the PSUP Measure the voltages on the output of the LVPS and the incoming voltages to the Maincon PCB.
A device powered by the LVPS could have a short circuit. Check the fuse on the LVPS PCB by the 160VDC input. If the fuse is blown, determine what component caused the short circuit before replacing the LVPS.

LVPS Power Distribution

1

The LVPS supplies several different components on the machine.

It supplies the Maincon PCB with power, which is the processor that controls the machine. 

The 12VDC supplied by the LVPS also is used to power the SKBIF PCB in the pendent.

If there are power issues related to these components, troubleshoot the other components before the LVPS:

SKBIF Troubleshooting Guide

Maincon PCB Troubleshooting Guide

PSUP PCB Troubleshooting Guide

2

If troubleshooting an issue where you suspect the maincon isn't receiving power, start by inspecting the maincon. An example of this would be if the machine fails to boot up.

Note: Refer to the Main Processor PCB TSG for both 15inch and 19inch machines for more information on troubleshooting the main processor.

Look for the LED in the upper left region of the Maincon PCB [1]. If the LED's labeled '+5V' is red [1],  then the maincon is receiving power.

3

If the LED's are lit, check the indicator lights on the PSUP PCB.

Verify that all 3 of the LEDs for +5V, +12V, and -12V are lit as shown in the image [1]. 

If they LED's are lit, then the PSUP is receiving the signals from the LVPS. Even if the LED's are lit, measure the voltages to make sure that the voltages are within the acceptable ranges. Measure at both P20 (output to Maincon) and P19 (input from LVPS).

P20:

  • Pin 8 to Pin 7: 4.75 - 5.25VDC
  • Pin 5 to Pin 6: 11.5 - 12.5VDC 
  • Pin 1 to Pin 6: -11.5 - -12.5VDC

P19:

  • Pin 5 to Pin 6: 4.75 - 5.25VDC
  • Pin 1 to Pin 3: 11.5 - 12.5VDC 
  • Pin 4 to Pin 3: -11.5 - -12.5VDC

If all the measured voltages are in range, then the LVPS is functioning as it should and the LVPS should not be replaced. 

If the measurements on P19 are within range, but the measurements on P20 are not, then the PSUP PCB needs to be troubleshot.

Note: If there is no voltage measured on the output of the LVPS, check if the LVPS is receiving 155-162VDC from the PSUP. If the LVPS isn't receiving any power, check the connections/cables going from the PSUP P21 to the LVPS.

LVPS Wiring Diagrams

15 Inch Control - LVPS Wiring Diagram

19 Inch Control - LVPS Wiring Diagram (iPFDM Included)

Recently Viewed Items

You Have No Recently Viewed Items Yet

Feedback
Haas Logo

美元价格不包括关税、报关费用、保险费、增值税及运费。
USD prices DO NOT include customs duty, customs fees, insurance, VAT, or freight.

人民币价格包含关税、报关费用、货运保险和增值税, 但不包括运费。
CNY prices include customs duty, customs fees, insurance, and VAT. DOES NOT include freight.

Preț de livrare Haas

Prețul include costul transportului, taxele de export și import, asigurarea și orice alte cheltuieli apărute în timpul expedierii către o locație din Franța, stabilită de comun acord cu dvs. în calitate de cumpărător. Nu pot fi adăugate alte costuri obligatorii la livrarea unui produs CNC de la Haas.

RĂMÂNEȚI LA CURENT CU CELE MAI RECENTE SFATURI ȘI TEHNOLOGII HAAS...

Înregistrați-vă acum!   

HAAS TOOLING ACCEPTS THE FOLLOWING:

  • Servicii și asistență
  • Proprietari
  • Solicitare de service
  • Manuale de utilizare
  • Piese Haas
  • Solicitare de reparație masă rotativă
  • Ghiduri de pre-instalare
  • Cumpărarea sculelor
  • Configurare și preț pentru o mașină Haas nouă
  • Inventar disponibil
  • Listă de prețuri Haas
  • Finanțare CNCA
  • Despre Haas
  • Declarația DNSH
  • Cariere
  • Certificări și siguranță
  • Contactați-ne
  • Istoric
  • Termeni și condiții
  • Termeni și condiții Haas Tooling
  • Confidențialitate
  • Garanție
  • Comunitatea Haas
  • Programul de certificare oferit de Haas
  • Sporturi cu motor Haas
  • Fundația Gene Haas
  • Comunitatea pentru formare tehnică Haas
  • Evenimente
  • Alăturați-vă conversației
  • Facebook
  • X
  • Flickr
  • YouTube
  • LinkedIn
  • Instagram
  • TikTok
© 2025 Haas Automation, Inc – Mașini-unelte CNC

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

2800 Sturgis Rd., Oxnard, CA 93030 / Toll Free: 800-331-6746
Phone: 805-278-1800 / Fax: 805-278-2255