A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.CONTACT YOUR DISTRIBUTOR >
The HA2TS is a dual-spindle 5C system mounted on a plate with pneumatic tailstocks. Tailstock thrust must not exceed 800 lb (3559 N). Clamp your parts using standard 5C collets, or chuck them by threading 3-jaw chucks to the spindle noses. This unit has no collet closing capability as standard. Optional pneumatic collet closers are available.
Requires a Haas mill with 4th-axis drive and software version 18.00 or later for full 4th-axis operation, or a rotary control box for stand-alone operation.
|Max Speed||200 °/sec||200 °/sec|
|Max Torque||25 ft-lbf||34 Nm|
|Nose Thread||2 3/16 in - 10||2 3/16 in - 10|
|Runout Max||0.0004 in||0.010 mm|
|Center Height||5.875 in||149.23 mm|
|Accuracy (±)||± 60 arc-sec||± 60 arc-sec|
|Repeatability||10 arc-sec||10 arc-sec|
|Backlash||50 arc-sec||50 arc-sec|
|Worm Gear Dia||2.8 in||71 mm|
|Max Rotation/Step (with rotary control)||999.999 °||999.999 °|
|Power Requirement||115 VAC ± 10% @ 15 A||115 VAC ± 10% @ 15 A|
|Operating Temp (max ambient)||100 °F||38 °C|
|Air Pressure Max||150 psi||10.3 bar|
|Brushless Control||14.2 lb||6.4 kg|
|Rotary Assembly||280 lb||127.0 kg|
Roll over image to zoom in
If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.
5C Indexer with Thrust Bearings, for use with tailstocks
2-Head 5C Indexer with Thrust Bearings, for use with tailstocks
All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.