Declaration of Incorporation

ES0766AE

Product: Haas Bar Feeder

Manufactured By:

Haas Automation, Inc.
2800 Sturgis Road, Oxnard, CA 93030 
805-278-1800

We declare, in sole responsibility, that the above listed product, to which this declaration refers, cannot function independently and does not change the function of the machine it is attached to. The Haas Bar Feeder, when incorporated into Haas CNC Lathes (turning centers), complies with the regulations as outlined in the CE directive for turning centers.

  • Machinery Directive 2006/42/EC

Additional Standards:

  • EN 60204-1:2018
  • EN ISO 13849-1:2015

RoHS2: COMPLIANT (2011/65/EU) by Exemption per producer documentation. 

Exempt by:

  • Large scale stationary industrial tool.
  • Lead as an alloying element in steel, aluminum, and copper.
  • Cadmium and its compounds in electrical contacts.

Person authorized to compile technical file:

Kristine De Vriese
Phone: +32 (2) 4272151

Address:

Haas Automation Europe
Mercuriusstraat 28
B-1930 Zaventem
Belgium

USA: Haas Automation certifies this machine to be in compliance with the OSHA and ANSI design and manufacturing standards listed below. Operation of this machine will be compliant with the below-listed standards only as long as the owner and operator continue to follow the operation, maintenance, and training requirements of these standards.

  • OSHA 1910.212 - General Requirements for All Machines
  • ANSI B11.5-1984 (R1994) Lathes
  • ANSI B11.19-2019 Performance Requirements for Risk Reduction Measures
  • ANSI B11.22-2002 Safety Requirements for Turning Centers and Automatic Numerically Controlled Turning Machines
  • ANSI B11.TR3-2000 Risk Assessment and Risk Reduction - A Guideline to Estimate, Evaluate, and Reduce Risks Associated with Machine Tools

CANADA: As the original equipment manufacturer, we declare that the listed products comply with regulations as outlined in the Pre-Start Health and Safety Reviews Section 7 of Regulation 851 of the Occupational Health and Safety Act Regulations for Industrial Establishments for machine guarding provisions and standards.

Further, this document satisfies the notice-in-writing provision for exemption from Pre-Start inspection for the listed machinery as outlined in the Ontario Health and Safety Guidelines, PSR Guidelines dated November 2016. The PSR Guidelines allow that notice in writing from the original equipment manufacturer declaring conformity to applicable standards is acceptable for the exemption from Pre-Start Health and Safety Review.

All Haas CNC machine tools carry the ETL Listed mark, certifying that they conform to the NFPA 79 Electrical Standard for Industrial Machinery and the Canadian equivalent, CAN/CSA C22.2 No. 73. The ETL Listed and cETL Listed marks are awarded to products that have successfully undergone testing by Intertek Testing Services (ITS), an alternative to Underwriters'  Laboratories.

Haas Automation has been assessed for conformance with the provisions set forth by ISO 9001: 2015.  Scope of Registration: Design and Manufacture of CNC Machines Tools and Accessories, Sheet Metal Fabrication.  The conditions for maintaining this certificate of registration are set forth in ISA's Registration Policies 5.1.  This registration is granted subject to the organization maintaining compliance to the noted stardard.  The validity of this certificate is dependent upon ongoing surveillance audits.