CL-1

CNC Chucker Lathe with 1" bar capacity
  • 5C Spindle Nose Chuck Size
  • 1.0" Bar Capacity
  • 6k RPM
  • 5 hp Power
   
7.5 %
OFF
 
Compare Machines
BUILD & PRICE
Contact Distributor

The innovative CL-1 is an ultra-compact CNC chucker lathe that comes standard with an 8-station automatic turret, making it ideal for dedicated small-part production, second-op parts, or short runs and prototyping small parts, such as those found in the communications, aerospace, medical, and dental industries. The CL-1 can be moved easily with a pallet jack or equipment dolly, and is small enough to fit into most freight elevators.

  • Ultra-compact chucker lathe
  • Operates on single- or three-phase power
  • Can be moved easily with a pallet jack
  • Easy access to tank and pump for cleaning out chips 
  • Made in the USA

How to Operate the CL-1


This simple, step-by-step explanation of how to operate the CL-1 will have you running parts and ready for production in no time.

Standard Features

Spindles

  • 6000-rpm Spindle

Turrets & Live Tooling

  • 8-Station Tool Turret

Chip & Coolant Management

  • Window Air Blast
  • 13-Gallon Coolant Tank

The Haas Control

  • Media Display M-Code; M130
  • HaasConnect: Remote monitoring
  • Early Power-Failure Detection Module
  • Ethernet Interface
  • Rigid Tapping
  • Spindle Orientation
  • Standard Program Memory, 1 GB

Tooling & Fixturing

  • Standard Gang-Style Tooling Kit with 1/2" Center Height

Warranty

  • 1-Year Standard Warranty
Swing Diameter S.A.E METRIC
Over Cross Slide 11.0 in 279 mm
Over Table 4.95 in 126 mm
Capacities S.A.E METRIC
Chuck Size (max) 4.0 in 102 mm
Max Cutting Diameter 5.0 in 126 mm
Bar Capacity 1.00 in 25 mm
Travels S.A.E METRIC
X Axis 12.0 in 305 mm
Z Axis 8.0 in 203 mm
Feedrates S.A.E METRIC
Max Cutting 500 ipm 12.7 m/min
Rapids on X 757 ipm 19.2 m/min
Rapids on Z 757 ipm 19.2 m/min
Axis Motors S.A.E METRIC
Max Thrust X 1149 lbf 5111 N
Max Thrust Z 1149 lbf 5111 N
Spindle S.A.E METRIC
Spindle Nose 5C (collet) Type Nose 5C (collet) Type Nose
Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive
Max Rating 5.0 hp 3.7 kW
Max Speed 6000 rpm 6000 rpm
Spindle Bore ø 1.25 in 31.8 mm
Tooling S.A.E METRIC
Tooling Gang Style-Any Combination Gang Style-Any Combination
General S.A.E METRIC
Coolant Capacity 13 gal 49 L
Air Requirements S.A.E METRIC
Air Required 1 scfm @ 70 psi 28 L/min @ 4.8 bar
Inline Air Hose 3/8 in 3/8 in
Coupler (Air) 3/8 in 3/8 in
Air Pressure Min 40 psi 2.8 bar
Electrical Specification S.A.E METRIC
Spindle Speed 6000 rpm 6000 rpm
Drive System Direct Speed, Belt Drive Direct Speed, Belt Drive
Spindle Power 5.0 hp 3.7 kW
Input AC Voltage (1 Phase) 220 VAC 220 VAC
Full Load Amps (1 Phase) 16 A 16 A
Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC
Full Load Amps (3 Phase) - Low 12 A 12 A

Talk to Us

If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.

See the Chucker Lathe in Action


THE HAAS CL-1 CHUCKER LATHE
A quick introduction to the Haas CL-1.
THE HAAS CL-1 AT IMTS 2016
Haas Tip-of-the-Day expert Mark Terryberry introduces the new Haas CL-1 Chucker lathe live at the Haas Automation IMTS 2016 booth.
CL-1 TEASER DEMO
This video asks the question: “What would you like to see the CL-1 do?”
Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
Today, Mark shows you how to save time and money by using your Insert Drill to perform both a drilling operation AND a boring operation.

Other Similar Machines


All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. All prices are in U.S. dollars. Machines shown with optional equipment. Actual product appearance may differ.