A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >
A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >
The Haas ST Series high-performance turning centers were designed from the ground up to provide setup flexibility, extreme rigidity, and high thermal stability.
The ST-45 is a large-frame, big-bore lathe with a generous work envelope. This machine offers the best performance for the money – the best value – in its class.
| Swing Diameter | S.A.E | METRIC |
|---|---|---|
| Over Front Apron | 34.5 in | 876 mm |
| Over Cross Slide | 25.5 in | 648 mm |
| Over Tailstock | 25.5 in | 648 mm |
| Capacities | S.A.E | METRIC |
|---|---|---|
| Chuck (optional) | 18.0 in | 457 mm |
| Max Cutting Diameter (varies with turret) | 25.5 in | 648 mm |
| Max Cutting Length (without workholding) | 44 in | 1118 mm |
| Bar Capacity w/ Opt. Workholding | 6.50 in | 165 mm |
| Travels | S.A.E | METRIC |
|---|---|---|
| X Axis | 17.0 in | 432 mm |
| Z Axis | 44.0 in | 1118 mm |
| Feedrates | S.A.E | METRIC |
|---|---|---|
| Rapids on X | 710 ipm | 18.0 m/min |
| Rapids on Z | 710 ipm | 18.0 m/min |
| Axis Motors | S.A.E | METRIC |
|---|---|---|
| Max Thrust X | 5500 lbf | 24465 N |
| Max Thrust Z | 9000 lbf | 40034 N |
| Spindle | S.A.E | METRIC |
|---|---|---|
| Spindle Nose | A2-11 | A2-11 |
| Drive System | 2-Speed Gearbox | 2-Speed Gearbox |
| Max Rating | 40.0 hp | 29.8 kW |
| Max Speed | 1400 rpm | 1400 rpm |
| Max Torque | 1400 ft-lbf @ 150 rpm | 1898 Nm @ 150 rpm |
| Spindle Bore ø | 7.00 in | 178.0 mm |
| XP Option | S.A.E | METRIC |
|---|---|---|
| Drive System | 2-Speed Gearbox | 2-Speed Gearbox |
| Max Rating | 55.0 hp | 41.0 kW |
| Max Speed | 1400 rpm | 1400 rpm |
| Max Torque | 2100 ft-lbf @ 150 rpm | 2847 Nm @ 150 rpm |
| Input AC Voltage (3 Phase) - Low | 220 VAC | 220 VAC |
| Full Load Amps (3 Phase) - Low | 105 A | 105 A |
| Input AC Voltage (3 Phase) - High | 440 VAC | 440 VAC |
| Full Load Amps (3 Phase) - High | 53 A | 53 A |
| PC18KIT | S.A.E | METRIC |
|---|---|---|
| Chuck Size | 18.0 in | 457 mm |
| Max Speed | 1400 rpm | 1400 rpm |
| Draw Tube Bore ø | 6.5 in | 165 mm |
| Turret | S.A.E | METRIC |
|---|---|---|
| Number of Tools | 12-Station BOT | 12-Station BOT |
| OD vs ID Tools | Any Combination (will vary with turret) | Any Combination (will vary with turret) |
| Boring Bar Rear Clearance (from back of turret ) | 4.37 in | 111.0 mm |
| General | S.A.E | METRIC |
|---|---|---|
| Coolant Capacity | 95 gal | 360 L |
| Air Requirements | S.A.E | METRIC |
|---|---|---|
| Air Required | 4 scfm @ 100 psi | 113 L/min @ 6.9 bar |
| Inline Air Hose | 3/8 in | 3/8 in |
| Coupler (Air) | 3/8 in | 3/8 in |
| Air Pressure Min | 80 psi | 5.5 bar |
| Electrical Specification | S.A.E | METRIC |
|---|---|---|
| Spindle Speed | 1400 rpm | 1400 rpm |
| Drive System | 2-Speed Gearbox | 2-Speed Gearbox |
| Spindle Power | 40.0 hp | 29.8 kW |
| Input AC Voltage (3 Phase) - Low | 220 VAC | 220 VAC |
| Full Load Amps (3 Phase) - Low | 70 A | 70 A |
| Input AC Voltage (3 Phase) - High | 440 VAC | 440 VAC |
| Full Load Amps (3 Phase) - High | 35 A | 35 A |
Roll over image to zoom in
If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.
CNC Lathe with 25.5" x 80" max capacity and 4.0" bar capacity
CNC Lathe with 25.5" x 80" max capacity and 7.0" bore
CNC Lathe with 25.5" x 80" Max Capacity and 8.5" Bore
All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.
