NOTE: This is procedure should only be performed by a Haas certified service technician.
This procedure tells you how to update the firmware on:
Note: Always create a backup of the machine before you update the firmware. Refer to Machine Data Backup - NGC procedure.
Important: Damage can occur to the I/O PCB if incompatible firmware is installed. Look at the part number that is located on the I/O PCB and make sure that you load the correct firmware version. Refer to the I/O PCB Firmware compatibility table below.
|I/O, CAN PCB Firmware Compatibility Table|
|NGC I/O PCB||SIO (Main) Version||I/O TC Version||CAN Auto Door / E-Vise PCB Version||CAN Spindle Head / Lube Panel PCB Version|
|34-348xC||02.xx||01.08 or higher||N/A||N/A|
|34-349x||04.09 or higher||02.06 or higher||01.28 or higher||1.10 or higher|