A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >
A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.
CONTACT YOUR DISTRIBUTOR >
The T5C3 is a dual-axis tilting rotary unit with three 5C collet rotary spindles. Clamp your parts using standard 5C collets, or chuck them by threading 3-jaw chucks to the spindle noses. This unit has no collet closing capability as standard. Optional collet closers are available.
Requires a Haas mill with 4th- and 5th-axis drives and software version 18.00 or later for true 4th- and 5th-axis operation.
| Platter | S.A.E | METRIC |
|---|---|---|
| Max Weight on Platter | 5 lb | 2.3 kg |
| Spindle – A (tilt) | S.A.E | METRIC |
|---|---|---|
| Max Speed | 60 °/sec | 60 °/sec |
| Max Torque | 210 ft-lbf | 285 Nm |
| Runout Max | 0.0005 in | 0.013 mm |
| Backlash | 30 arc-sec | 30 arc-sec |
| Center Height | 6.000 in | 152.40 mm |
| Gear Ratio | 90:1 | 90:1 |
| Timing | 2:1 | 2:1 |
| Brake Torque @ 100 psi/6.9 bar | 200 ft-lbf | 271 Nm |
| Spindle – B (rotary) | S.A.E | METRIC |
|---|---|---|
| Number | 3 | 3 |
| Max Speed | 200 °/sec | 200 °/sec |
| Max Torque | 25 ft-lbf | 34 Nm |
| Nose Thread | 2 3/16 in - 10 | 2 3/16 in - 10 |
| Runout Max | 0.0004 in | 0.010 mm |
| Backlash | 50 arc-sec | 50 arc-sec |
| Center Height | 6.000 in | 152.40 mm |
| Gear Ratio | 60:1 | 60:1 |
| Collet Size | 5C | 5C |
| Indexing – A (tilt) | S.A.E | METRIC |
|---|---|---|
| Max Rotation/Step | ± 120 ° | ± 120 ° |
| Resolution | 0.001 ° | 0.001 ° |
| Accuracy (±) | ± 15 arc-sec | ± 15 arc-sec |
| Repeatability | 10 arc-sec | 10 arc-sec |
| Worm Gear Dia | 6.3 in | 160 mm |
| Indexing – B (rotary) | S.A.E | METRIC |
|---|---|---|
| Max Rotation/Step (with rotary control) | 999.999 ° | 999.999 ° |
| Resolution | 0.001 ° | 0.001 ° |
| Accuracy (±) | ± 60 arc-sec | ± 60 arc-sec |
| Repeatability | 10 arc-sec | 10 arc-sec |
| Worm Gear Dia | 2.8 in | 71 mm |
| General – A (tilt) | S.A.E | METRIC |
|---|---|---|
| Operating Temp (max ambient) | 100 °F | 38 °C |
| Air Requirements | S.A.E | METRIC |
|---|---|---|
| Air Pressure Max | 150 psi | 10.3 bar |
| Air Pressure Min | 80 psi | 5.5 bar |
| General – B (rotary) | S.A.E | METRIC |
|---|---|---|
| Operating Temp (max ambient) | 100 °F | 38 °C |
| Weight | S.A.E | METRIC |
|---|---|---|
| Table | 420 lb | 191.0 kg |
| Brushless Control – 1-Axis | 14.2 lb | 6.4 kg |
Roll over image to zoom in
If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.
All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.
