T5C2

   
Tilting 2-Head 5C Indexer
  • 2 Spindles
  • 5C Collet Size
  • 25 ft-lb Max Torque
  • 200 °/sec Max Speed
Compare Machines
BUILD & PRICE
Contact Distributor

The T5C2 is a dual-axis tilting rotary unit with two 5C collet rotary spindles. Clamp your parts using standard 5C collets, or chuck them by threading 3-jaw chucks to the spindle noses. This unit has no collet closing capability as standard. Optional collet closers are available.

Requires a Haas mill with 4th- and 5th-axis drives and software version 18.00 or later for true 4th- and 5th-axis operation. 

  • Add 4- and 5-axis capabilities to your machine
  • Increased productivity with multiple rotary spindles
  • Easy plug-and-play connection to Haas machines
  • Industry-leading performance and capabilities
  • Made in the USA
Platter S.A.E METRIC
Max Weight on Platter 5 lb 2.3 kg
Spindle – A (tilt) S.A.E METRIC
Max Speed 60 °/sec 60 °/sec
Max Torque 210 ft-lbf 285 Nm
Runout Max 0.0005 in 0.013 mm
Backlash 30 arc-sec 30 arc-sec
Center Height 6.000 in 152.40 mm
Gear Ratio 90:1 90:1
Timing 2:1  2:1 
Brake Torque @ 100 psi/6.9 bar 200 ft-lbf 271 Nm
Spindle – B (rotary) S.A.E METRIC
Number 2 2
Max Speed 200 °/sec 200 °/sec
Max Torque 25 ft-lbf 34 Nm
Nose Thread 2 3/16 in - 10 2 3/16 in - 10
Runout Max 0.0004 in 0.010 mm
Backlash 50 arc-sec 50 arc-sec
Center Height 6.000 in 152.40 mm
Gear Ratio 60:1 60:1
Collet Size 5C 5C
Indexing – A (tilt) S.A.E METRIC
Max Rotation/Step ± 120 ° ± 120 °
Resolution 0.001 ° 0.001 °
Accuracy (±) ± 15 arc-sec ± 15 arc-sec
Repeatability 10 arc-sec 10 arc-sec
Worm Gear Dia 6.3 in 160 mm
Indexing – B (rotary) S.A.E METRIC
Max Rotation/Step (with rotary control) 999.999 ° 999.999 °
Resolution 0.001 ° 0.001 °
Accuracy (±) ± 60 arc-sec ± 60 arc-sec
Repeatability 10 arc-sec 10 arc-sec
Worm Gear Dia 2.8 in 71 mm
General – A (tilt) S.A.E METRIC
Operating Temp (max ambient) 100 °F 38 °C
Air Requirements S.A.E METRIC
Air Pressure Max 150 psi 10.3 bar
Air Pressure Min 80 psi 5.5 bar
General – B (rotary) S.A.E METRIC
Operating Temp (max ambient) 100 °F 38 °C
Weight S.A.E METRIC
Table 370 lb 168.0 kg
Brushless Control – 1-Axis 14.2 lb 6.4 kg

Talk to Us

If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.

See Haas Rotary Tables in Action


CYLINDRICAL ENGRAVING USING G47/G107
Your Haas mill plus G107 can have you engraving on a cylindrical part right away, and you don’t need an expensive CAM system to pull it off! In this third video in our 3-part series on engraving, Mark explains how to program cylindrical engraving in four easy steps.
UNWIND YOUR HAAS ROTARY QUICKLY
Today, Mark solves an issue every Haas Rotary user faces at some point: How do I get my rotary back to zero quickly?
How to Program a SAFE TOOL CHANGE POSITION
Mark shows you how to easily command a safe tool change position to avoid crashing a tool into your fixture or rotary. It’s all done with a simple program that you only need to write once, then you simply alias (reference) that program with a single M code!
Meet your new 5-axis compact machine
If you make small parts and have multiple setups, this rotary is probably right for you. Lightning fast and accurate, the TRT100 fits in nearly every Haas mill, and will help you cut cycle times and boost your shop’s efficiency.

Other Similar Machines


All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.