A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.CONTACT YOUR DISTRIBUTOR >
The HA5C is a single-axis rotary unit with a 5C collet nose. Clamp your parts using standard 5C collets, or chuck them by threading a 3-jaw chuck to the spindle nose. This unit comes with a manual collet closer. Optional pneumatic collet closers are also available.
Requires a Haas mill with 4th-axis drive and software version 18.00 or later for full 4th-axis operation, or a rotary control box for stand-alone operation.
|Max Speed||410 °/sec||410 °/sec|
|Max Torque||60 ft-lbf||81 Nm|
|Nose Thread||2 3/16 in - 10||2 3/16 in - 10|
|Runout Max||0.0004 in||0.010 mm|
|Center Height||4.000 in||101.60 mm|
|Backlash||40 arc-sec||40 arc-sec|
|Accuracy (±)||± 30 arc-sec||± 30 arc-sec|
|Repeatability||10 arc-sec||10 arc-sec|
|Resolution||0.001 °||0.001 °|
|Worm Gear Dia||2.8 in||71 mm|
|Max Rotation/Step (with rotary control)||999.999 °||999.999 °|
|Power Requirement||115 VAC ± 10% @ 15 A||115 VAC ± 10% @ 15 A|
|Operating Temp (max ambient)||100 °F||38 °C|
|Air Pressure Max||150 psi||10.3 bar|
|Brushless Control – 1-Axis||14.2 lb||6.4 kg|
|Rotary Assembly||48 lb||21.8 kg|
Roll over image to zoom in
If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.
High-Speed 5C Indexer
5C Indexer with Thrust Bearings, for use with tailstocks
All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.