1.1 Introduction

Overview

This operator’s manual describes the features and functions of a Lathe CNC machine. 

DOWNLOADS & ADDITIONAL MANUALS

Download Lathe Operator's Manual (PDF)
Explore All Operator’s and Service Manuals

1.2 Lathe Overview

Lathe - Features (Front View)

These figures show some of the standard and optional features of your Haas lathe. Some of the features shown are highlighted in their appropriate sections. Note that these figures are representative only; your machine’s appearance may vary depending on the model and installed options.

1. 2X High Intensity Lights (Optional)
2. Work Light (2X)
3. Chip Conveyor (Optional)
4. Oil Drain Container
5. Chip Container
6. Air Gun
7. Foot Pedal
8. Parts Catcher (Optional)
9. Hydraulic Power Unit (HPU)
10. Coolant Collector
11. Spindle Motor
12. Auto Door (Optional)

A. Control Pendant
B. Lubrication Panel Assembly
C. Coolant Tank

Lathe - Features (Front View With Covers Removed)

1. Spindle Motor
2. Tool Turret Assembly
3. Tailstock (Optional)
4. Parts Catcher (Optional)
5. LTP Arm (Optional)
6. Chuck
7. C-Axis Drive Assembly (Optional)
8. Hydraulic Power Unit (HPU)
9. Spindle Head Assembly
10. Control Cabinet

Lathe - Features Detail A - Control Pendant with Cabinet

1. Work Beacon
2. Clipboard
3. Operator’s Manual and Assembly Data (stored behind pendant)
4. Side panel Controls
5. Tool Holder (also shown, tool holder for thin pendant)
6. Storage Tray
7. G- and M-code Reference List
8. Remote Jog Handle

Lathe - Features Detail B - Lubrication Panel Example

1. Min Lubrication Oil Solenoid
2. Air Pressure Gauge
3. Air Relief Valve
4. Rotary Table Air Supply
5. Air/Water Separator
6. Air Shut Off Valve
7. Purge Solenoid
8. Air Inlet Port
9. Spindle Lubrication Reservoir
10. Spindle Lubrication Sight Glass (2)
11. Axis Lubrication Oil Reservoir
12. Oil Pressure Gauge

Note: More details are shown on the decals inside of the access door.

Lathe - Features Detail C - Coolant Tank Assembly

1. Standard Coolant Pump
2. High-Pressure Coolant Pump (Optional)
3. Coolant Level Sensor
4. Chip Strainer
5. Strainer Basket

Toolroom Lathe - Features (Front View)

1. Spindle assembly
2. eHandwheel
3. Air Gun
4. Coolant Tank
5. Tailstock
6. Control Pendant

Toolroom Lathe - Features (Front View, Doors Removed)

1. Spindle Nose
2. Worklight
3. Cross Slide (tool post / turret not shown)
4. Coolant Tank
5. Tailstock

Feedback