Extended Tool Pocket

   
Provides clearance for long tools

This Extended Tool Pocket in the bulkhead provides clearance for long drills or boring bars when the turret is closest to the chuck (i.e., at maximum Z-axis travel). The maximum allowable tool length will vary depending on the workholding and parts. Note: ST-40/40L/45/45L pocket depth equals 33" (838 mm); ST-50/55 pocket depth equals 25" (635 mm).

  • Provides clearance for drills or boring bars up to 33" (838 mm) long on ST-40/40L/45/45L, or 25" (635 mm) on ST-50 and ST-55
  • Required for all applications where drills or boring bars exceed 15" (381 mm) long, and short tools are also being used
  • All long tools must to be mounted on one side of the turret
  • Maximum allowable tool length will vary based on workholding and parts

Talk to Us

If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.

All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.