DOWNLOAD AN INSTANT CUSTOM QUOTE FOR ANY HAAS MACHINE

DISCOVER WHY THE HAAS ST-28

IS AMERICA’S BEST-VALUE A2-8 TURNING CENTER

EXPLORE THE MOST POPULAR ST-28 CONFIGURATIONS IN YOUR AREA!

STARTER MACHINE

ST-28

Standard

Options:
✓ Automatic Tool Presetter
✓ Belt-Type Chip Conveyor, Lathe
✓ Programmable Hydraulic Tailstock
✓ Chip Tray Filter Kit

Learn more

JOB SHOP WORKHORSE

ST-28Y

Y-Axis and Tailstock

Options:
✓ High-Pressure Coolant
✓ 6000-rpm Speed Upgrade for Live Tooling
✓ Automatic Tool Presetter
✓ Belt-Type Chip Conveyor
✓ High-Intensity Lighting
✓ Parts Catcher
✓ Programmable Hydraulic Tailstock
✓ Auxiliary Coolant Filter
✓ Chip Tray Filter Kit

Learn more

DONE-IN-ONE AUTOMATION

ST-28Y

Y-Axis, Sub-Spindle, and 25 kg Robot

+ Haas Robot Package-2, 25 kg Capacity
Includes:
✓ Auto Door
✓ XL Remote Jog Handle w/Touchscreen

Options:
✓ A2-5 Finishing Sub-Spindle
✓ High-Pressure Coolant
✓ 6000-rpm Speed Upgrade for Live Tooling
✓ Automatic Tool Presetter
✓ Belt-Type Chip Conveyor
✓ High-Intensity Lighting
✓ Chuck Air Blast
✓ Sub-Spindle Air Blast
✓ Parts Catcher
✓ Auxiliary Coolant Filter
✓ Chip Tray Filter Kit
✓ Wifi Camera
✓ 32 GB Expanded Memory

Learn more

ST features and details

REASONS WHY AN ST IS RIGHT FOR YOU!

SPINDLES

ST Series high-performance spindles use a robust bearing arrangement that is 20% stiffer than on previous models, with 50% less thermal expansion. To ensure long-term reliability and simplified service, spindle bearings are lubricated automatically by a proprietary minimal lubrication system. All Haas spindles are designed and built in-house at our Southern California manufacturing facility.

TURRETS & LIVE TOOLING

Customize your Haas lathe with a variety of turrets, including our BMT65 turret with 4000-rpm live tooling. For additional capacity, our optional half-index BMT65 turret provides 24 stations – 12 with live tool capability.

MULTI-AXIS MACHINING

Adding additional axis motion to a lathe is the fastest way to boost throughput, increase accuracy, and reduce part handling. With Y axis, C axis, and live tooling, you can machine parts complete in a single setup. Haas ST Series Y-axis lathes offer the simplest and most cost-effective entry into multi-axis lathe machining in the industry, and the Haas control has built-in features that make multi-axis machining even easier.

LATHE PROBING

Setup reduction is critical to maximizing the productivity of any machine tool. With the probing solutions available from Haas, any machine can be set up in minutes, with just a few button pushes. Our Automatic Tool Presetter system features easy-to-use automated and manual modes of operation. It has a user-friendly interface for quick, conversational-style programming, and is one of the smartest investments you can make.

CHIP & COOLANT MANAGEMENT

Managing chips and coolant is critical for any machine tool. As machinists ourselves, we know that if you can’t keep chips out of the cutting area, and remove them from the machine efficiently, you aren’t using the machine to its full potential. Haas machines offer the widest selection of chip and coolant management options in the industry.

THE HAAS CONTROL

Ease of use and simplicity are the founding principles of the Haas Control. Designed and built exclusively by Haas since its inception in 1988, the Haas Control is the standard by which all other controls are measured. Commonality between vertical machining centers, horizontal machining centers, and turning centers ensures that operators can easily move from one Haas machine to another. Continued advancement of the Haas Control – with powerful features like power-failure detection, Ethernet connectivity, Dynamic Work Offsets, and HaasConnect remote machine monitoring – allows customers to maximize their investment in a Haas machine.

ST VIDEOS

ALL ST VIDEOS IN ONE PLACE, JUST FOR YOU . . .

HAAS ST-30LY TURNING STEEL

We took our Demo Day Live-streamed video and sliced it up, so you could get right to the heart of the presentation. Bhop and Bryan take a look at the ST-30LY in action turning 4140 steel, while they talk through the part Bhop is turning, and the various tools he’s using in the cut.

Haas ST-40 Demo

The Haas ST-40 heavy-duty turning center has a max turning capacity of 25.5" x 44", allowing it to easily handle large-diameter parts and long shafts.

Haas ST-30 Demo

The Haas ST-30 turning center provides heavy cutting ability, extreme rigidity, and high thermal stability, in a mid-size turning center with lots of standard features. A wide-selection of high-productivity options allows you customize the machine to your needs.

Haas ST-25Y & Automatic Parts Loader

What do you get when you take a productive Haas ST-25Y turning center and combine it with our Automatic Parts Loader? You get simple and affordable automation, of course! The Haas APL is easy to set up and operate, and ensures you’ll keep making parts, even when your operator is away tending another machine.

Haas ST-10 Demo

The Haas ST-10 turning center is extremely rigid, highly accurate, and very thermally stable. Standard equipment on the ST-10 includes rigid tapping, a 15" color LCD monitor, and a USB port.

Haas ST-10Y Demo

The ability to turn and mill complex parts and perform multiple operations on one machine increases throughput, reduces handling, and improves accuracy. The Haas ST-10Y is a small-footprint Y-axis turning center that provides 4" of Y-axis travel (±2" from the centerline) for off-center milling, drilling, and tapping, and comes standard with high-torque live tooling and a servo-driven C axis for versatile 4-axis capability.

Haas VS-3 Machining ST-30 Base Castings

There's lots of anticipation for Haas' new VS-3 large frame VMCs. But the fact is, we've been making the VS-3 for quite awhile now. Check out this footage from one of our VS-3 cells where we've been machining ST-30 base castings for years . Most of these cells get a helping hand from Midaco pallet changers to keep the spindle turning, while loading and unloading take place off line.

Haas ST-10Y Sub-Spindle Cutting Demo

Get a quick look at the Haas ST-10Y lathe, with our finishing sub-spindle taking some basic cuts on the 2nd side of the part.

Haas ST-10Y Finishing Spindle Cutting Demo

Here is some additional footage from our ST-10Y compact turning center. This time, we’re concentrating on milling, drilling, and tapping on the finishing sub-spindle. This A2-5, 6000 rpm, sub-spindle will help you get lots more accomplished in a single setup.

Haas ST-10Y and Parts Catcher Demo

Check out the Haas ST-10Y compact turning center doing some Y-axis cutting, and using our productivity-boosting Parts Catcher option.

Customer testimonials

HAAS CUSTOMER SUCCESS STORIES . . .

See how other shops are using Haas machines to stay on the cutting edge, and at the forefront of their industries.

“We discussed which machines to get for a week or more. We discussed every detail, and Haas helped with that, too. We finally decided on the ST-30 for turning. These are our first CNC machines, and we are very pleased with the machines and the service. The ST-30 does most of our parts, because we make so many pulleys and round parts.”

Michael Weiss | President | Weistec Engineering

CHAPMAN MANUFACTURING LTD

“The VF-2 has performed exceptionally,” Chris says, allowing Chapman Manufacturing to produce parts faster, more accurately, and with better surface finishes. “But it’s not just the machinery side of things,” he adds, “the after-sale service side of things is exceptional. Having a Haas service agent in Christchurch makes a massive difference.”

– Chris Chapman, Owner, Chapman Manufacturing

✔ Industry: CNC Job Shop
✔ Location: Christchurch, New Zealand
✔ Current Haas Machines: VF-2, ST-25Y, and Haas Bar Feeder

“Using the Haas VM-3 and ST-20 has helped our job shop stay competitive in a thriving market. The ST-20 will hold .0002" tolerances. With Haas machines, the advantages are clear. You can make a lot of money with them, they will hold good tolerances, and you can get machine parts the next day, if you need them.”
Nate Estep | CEO | Imperial Machine Co. LLC.

✔ Industry: CNC Job Shop
✔ Location: Heath, Ohio, USA
✔ Current Haas Machines: ST-20, VM-3, and HRT210.

VORTIC WATCH CO.

Industry: Watchmaking
Location: Fort Collins, Colorado, USA
Haas machines: Super Mini Mill, VM-2, ST-20Y with Bar Feeder, and CL-1 with Bar Feeder
Product they make on Haas machines: high-end wristwatches

ST-20Y + BAR FEEDER

"A key part to this machine to us was an Automation Solution"

JOHN SAUNDERS | OWNER | SAUNDERS MACHINE WORKS

John Saunders is the owner of Saunders Machine Works, and frequently posts videos on his NYC CNC YouTube channel. A self-taught machinist, John has become a recognized figure in the machining and manufacturing industry. His focus is on educating and inspiring the next generation of machinists and manufacturing entrepreneurs.