VIDEO: HSK Coolant Transfer Tube - HaasTooling.com

Mark explains the importance of using coolant transfer tubes on HSK toolholders that will be running with TSC.

VIDEO: 5-Axis vs 3-Axis - Which Would You Choose? 

We asked John Nelson to set up the same multi-sided part on both a VF-4SS and a UMC-500SS, to really delve into the differences in workholding, setup, and programming.

VIDEO: 5-Axis vs. 3-Axis - Viewer Comments

In our previous video, John compared making a 3+2 part on a VF-4SS versus making it on a UMC-500SS. We got lots of great comments on that video, so we decided to take a more in-depth look at how John set up the UMC for this job, and also discuss some of the comments we received.

INSTAGRAM: Airmate Company - Haas Customer

Repost: @hfo_trident_machine_group
Ohio fabrication shop, Airmate Company, brings work in-house by adding an automated milling cell – a Haas VF-2SS with Robot Package-1!
Check out the full video on our Instagram page.

AUTOMATION: Robots

There’s never been an easier way to add a 6-axis robot to a Haas machine. With Haas Robot Packages, you set up and control the robot directly from the Haas control, with no need for complex PLC connections or a 3rd-party integrator. Learn more. 

AUTOMATION: Check Out All of Haas’ Automation Options!

Haas offers many different options for automating your shop, from Automatic Part Loaders and Pallet Pools, to fully integrated Robot Systems. Depending on your shop’s needs, there’s an automation system that’s right for you. Learn more.

VIDEO: The Haas DS-30Y Reboot

Haas just released the updated version of our popular DS-30Y dual-spindle, Y-axis lathe. Product Specialist Mike Steinbock introduces all the new changes to this super productive workhorse.

VIDEO: Sync Your Spindles with G199!

Learn how to hand off parts from the main to the sub-spindle, how to orient the chucks, and how to be sure that the RPM on each spindle matches.

CUSTOMER: Kerek Industries

Kerek Industries works with medical equipment manufacturers, optics manufacturers, pump and valve manufactures, and sports and leisure industries. Their DS-30Y has helped them go from running parts in two operations to running them in one operation, and in less time.

VIDEO: Set Up and Use the APL for Haas Lathes

Andrew shows how easy it is to set up the Haas Automatic Parts Loader to load parts, and demonstrates how the APL works.

VIDEO: ST-25Y + APL - Simple, Affordable Automation

The Haas APL is easy to get up and running, and ensures you’ll keep making parts, even when your operator is away tending to another machine.

AUTOMATION: Lathe Automatic Parts Loader

The Haas Automatic Parts Loader is a simple and affordable way to automate part production and boost productivity on Haas turning centers. It is designed and built exclusively for use on Haas turning centers, and connects directly to the Haas control. Learn more.

VIDEO: Haas Control Options Overview

Haas has many options available for augmenting and enhancing the performance of our control. These options allow you to tailor the performance of your machine to your shop environment and the type of machining you’re doing.

VIDEO: Coolant Options Overview

Haas has lots of options available for getting coolant to the cutting zone. These options allow you to choose the methods that best match the kind of tools you’re using and the geometry of your parts.

VIDEO: Haas Robot Packages Overview

In this video, we look at each of our three robot packages, and discuss what you get in the package, their capacity and reach data, and the machines that each package will fit.

OPTIONS: Workholding Options

Different workpieces require different workholding! Whether you need platters for your mill, chucks for your lathe, or vises to automate, we have you covered.  Learn more.

AUTOMATION: Haas Bar Feeder

The Haas Bar Feeder is a simple and affordable way to automate part production on Haas turning centers to boost productivity. It is designed and built exclusively for use on Haas turning centers, and connects directly to the Haas control. An innovative rollaway design provides easy access to the rear of the lathe spindle for quick liner adapter and spindle liner changes. Learn more.

CAREER/EDUCATION: Get Certified

The Haas CNC Certification Program will help you stand out in the manufacturing industry as a knowledgeable, qualified CNC operator. We provide both mill and lathe certifications! Learn more.

VIDEO: ER Collet Essentials Part Two - Haas Tip of the Day

Mark is back to help us understand the important differences between standard, sealed, and tapping collets in this Haas Tip of the Day.

VIDEO: ER Collet Essentials - Tip of the Day

Mark looks at each type of collet, and explains how and when to use each one.

VIDEO: Tools of the Trade - Tip of the Day

Mark goes over all the essential tools you’ll need to start making parts on day one.

5-AXIS: VMC + Rotary or Integrated 5-Axis?

5-Axis machining can be simplified into 4 easy steps:

1. Choose a Machine or a Machine + Rotary
2. Pick Your Tools
3. Hold On Tight
4. Program Away

Learn more!

SERVICE: Look Up G-Codes and More!

Did you know that you can look up G-codes and M-codes on our service page? Check it out here.

VIDEO: Haas ST-15Y with BMT45 Turret Cutting Steel Demo

Simply select a machine from our myriad of choices, and then add the options that are right for you. All pricing and financing information is right there – with no waiting. Build and price your machine here.

VIDEO: Haas ST-25 Cutting Demo - Rough, Finish, Groove, Thread, and Broach

Check out this extended cutting demo on the ST-25, where we show all the operations involved on this workpiece, including OD roughing and finishing, OD and ID grooving, threading, and we even broach slots to finish it off.

VIDEO: Haas ST-15Y with BMT45 Turret Cutting Steel Demo

The Haas ST-15Y is a great way to get Y-axis turning productivity into your shop, while taking up minimal floor space. The BMT45 turret (now standard) provides increased rigidity and performance in your Y-axis milling and drilling operations.

VIDEO: Haas ST-10Y and HRP-1 Robot Demo

Check out this ST-10Y turning center with our 7 kg robot that we ran at the Student Summit booth at IMTS 2022.

VIDEO: Turning Center Overview

Just like with our line of CNC mills, Haas makes a wide array of turning centers to fit the parts you’re turning and the budget you’re working with. And when you’re ready to step into fully automating your turning cell, we have a variety of directions you can take to achieve your lights-out production goals. Check out this quick overview of everything we have to offer!

VIDEO: Haas Lathe Hydraulic Power Unit Maintenance 

In this video, Orville lays out the basic maintenance steps necessary to make sure your lathe hydraulic power unit is running correctly and giving you reliable service.

VIDEO: Leveling Your Lathe

Every machine tool needs to be checked for level periodically to ensure the machine geometry remains correct. In this video, Orville reviews the procedure for adjusting the level on your Haas turning center. So if it’s been a while since this was last checked, watch the video and follow along to check your own machine.

VIDEO: M-Code Time Savers Wrap-Up – Adding Up the Time Savings

John summarizes all of the different ways to save time by correctly using various M-codes. Then he looks at adding together a bunch of these changes to get maximum cycle time reduction throughout an entire program.

VIDEO: How Do Frames Work on a Haas Robot?

Manufacturing Engineer Mallory Tevini gives an in-depth tour of how these “frames” work, and explains how to set them up to match your gripper and work table configurations.

SHOP: Find the Perfect Rotary

Check out the lineup of rotaries Haas has to offer. From 5-axis rotaries to 5C indexers, there is a perfect rotary for you and your machine. Check it out. 

SHOP: Get In-Stock Machines

Did you know we have available inventory that’s ready to be shipped? See our full list of in-stock machines here.

SHOP: Robots

As you pursue your next goal, look no further than the Haas Robot System for your needs. Nowhere else can you find a machine, robot, and all necessary items (workholding and safety features) integrated at such a low cost. Learn more.

SERVICE: Search for Codes on Our Service Page

Did you know that you can look up G-codes and M-codes on our service page? Check it out here.

VIDEO: Aligning a Broaching Tool on Your Haas Mill

Product Specialist Bhop Singh shows us how to align a broaching tool/insert on your Haas mill.

VIDEO: Broaching on Your Haas Mill! We Have the Tools & the Templates

Bhop Singh shows us how to do broaching on a Haas Mill, with VPS templates to help you program.

MACHINE: Newly Redesigned DS-30Y

The completely redesigned DS-30Y has a more compact footprint, a fully interpolated C-axis (with brake) on the sub-spindle, and is available with an auto door, so it’s compatible with Haas robot packages. Learn more.

GUIDE: Tips and Resources for a Beginner to CNC

If you’re new to CNC machining, check out our New to CNC page, where we explain all of the things you need to get started, including a machine buying guide, online learning resources, videos, and more. Check it out.

GUIDE: Haas Brochures and Catalogs

Want more guides to automation, tooling, and our machines? We have a whole list of Haas model guides and brochures for you to use as a resource. Check it out.

GUIDE: For Advanced Haas Users

Already have a Haas machine? Maximize your Haas, and discover how you can make the most of your machine and your setup! Get the most out of Haas using fleet management, the MyHaas app, and more!

VIDEO: Haas Coolant Options Overview

Haas provides a lot of coolant options designed to work with all of our mills and turning centers. Check out this video to decide which coolant options you need. 

VIDEO: M-Code Time Savers - M10 thru M13 Rotary Axis Brake Commands

John Nelson tells us the best way to program your 4th & 5th-axis rotation commands to minimize the time spent actuating the rotary brakes on each axis.

OPTIONS: Workholding Options

Different workpieces require different workholding! Whether you need platters for your mill, chucks for your lathe, or vises to automate, we have you covered.  Learn more.

SERVICE: Preventive Maintenance

Unnecessary machine downtime can eliminate everything you have gained at your shop. That is why at Haas, we like to provide our customers with as much information as possible about keeping their machines up and running. It is not as complicated as you think; with the videos and simple procedures we provide, you can have the confidence that your machine is in top operating condition. Learn more.

HTEC: Machines in Education

We have created specially configured and priced EDU versions of our most popular machines, exclusively for educational institutions. These EDU models make it easier for schools to place machines in their shops to give students hands-on experience. Learn more.

SOCIAL: The Push Bar - Inside the Factory

See how we use the Push Bar at the Haas Factory when we’re loading our machines to be shipped. Check out the full video on our social media platforms below!

LinkedIn
Instagram
Facebook
 

GUIDE: Buying Your First CNC Machine

First time CNC buyer? Check out this comprehensive guide to what you’ll need to know – from shop space to tooling basics to programming!

CAREER: Want to Work at Haas Automation?

Haas Automation is hiring, and we want YOU to be part of the team. As the largest machine tool builder in the western world, we need world-class talent in all of our departments. Learn more.

MYHAAS APP: Machining on the Go

Access our machining resources on the go with the MyHaas app! You can:

• Purchase HaasTooling right on the app
• Use the Speeds & Feeds Calculator
• Access Procedures, Troubleshooting Guides, Videos, How-To Procedures, References, and more.
• Set up HaasConnect and HaasDrop to manage your machines, and send files straight from your phone.

Learn more about MyHaas here.

VIDEO: The Haas VC-400 and Pallet Pool

The VC-400 combines the versatility of our small VF Series vertical machining centers with the pallet-changing ability of our EC-400 HMC. The fully integrated pallet changer allows you to set up jobs on one pallet, while running parts on another pallet.

VIDEO: UMC-500SS Pallet Pool Spotlight

From our 2020 HaasTec livestream, Marcus and Andrew are looking at the UMC-500SS with our 16-Station Pallet Pool. They talk about pallet pool specs, how it’s used to load jobs, and the MRZP setting processes. 

VIDEO: The Haas VMC Pallet Pool

Our 3+1 pallet pool for the Haas VF-2YT Series VMCs is perfect for high-volume production runs, or high-mix/low-volume machining. Product Specialist Mike Steinbock presents some great reasons why the new VF Pallet Pool makes perfect sense when you’re trying to increase your spindle up-time.