1. Select Language
    1. English
    2. Français
    3. Español
    4. Italiano
    5. Deutsch
Find A Dealer MyHaas
  • machines
    • Haas Vertical Mills
      Vertical Mills
      • Vertical Mills
      • VF Series
      • Universal Machines
      • Mini Mills
      • Mold Machines
      • Drill/ Tap/ Mill Series
      • Toolroom Mills
      • Compact Mills
      • Gantry Series
    • Haas Lathes
      Lathes
      • Lathes
      • ST Series
      • Dual-Spindle
      • Toolroom Lathes
      • Chucker Lathe
      • Bar Feeder
      • Auto Parts Loader
    • Haas Horizontal Mills
      Horizontal Mills
      • Horizontal Mills
      • EC Series
    • Haas Rotaries & Indexers
      Rotaries & Indexers
      • Rotaries & Indexers
      • Rotary Tables
      • Indexers
      • 5-Axis Rotaries
      • Extra-Large Rotaries
      • Shop All Machines

      Want to see the entire machine lineup?

      VIEW PRICE LIST >Price List
      Build & Price

      Need help finding the right machine?

      LET US GUIDE YOU >Build & Price
      SHOPPING TOOLS
      • Build & Price a Haas
      • Price List
      • Available Inventory
      • CNCA Financing
      WANT TO TALK TO SOMEONE?

      A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.

      CONTACT YOUR DISTRIBUTOR >
  • Options
    • Product Image
      Spindles
      • Spindles
    • Product Image
      Tool Changers
      • Tool Changers
    • Product Image
      Multi-Axis Machining
      • Multi-Axis Machining
    • Product Image
      Turrets & Live Tooling
      • Turrets & Live Tooling
    • Product Image
      Probing
      • Probing
    • Haas Chip & Coolant Management
      Chip & Coolant Management
      • Chip & Coolant Management
    • The Haas Control
      The Haas Control
      • The Haas Control
    • Product Image
      Product Options
      • Product Options
    • Product Image
      Tooling & Fixturing
      • Tooling & Fixturing
    • Product Image
      Workholding
      • Workholding
    • Product Image
      5-Axis Solutions
      • 5-Axis Solutions
      • 5 Easy Steps to 5-Axis
      • Shop All Machines

      Want to see the entire machine lineup?

      VIEW PRICE LIST >Price List
      Build & Price

      Need help finding the right machine?

      LET US GUIDE YOU >Build & Price
      SHOPPING TOOLS
      • Build & Price a Haas
      • Price List
      • Available Inventory
      • CNCA Financing
      WANT TO TALK TO SOMEONE?

      A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.

      CONTACT YOUR DISTRIBUTOR >
  • Industry

    • By Category
      • By Category
      • Available Inventory
      • Product Price List

    • By Industry
      • By Industry
      • Product ImageAerospace & Defense
      • Product ImageJob Shop & OEM
      • Product ImageAutomotive
      • Product ImageMedical & Dental
      • Product ImageEducation & Schools
      • Product ImageMold Making
      • Product ImageEnergy & Heavy Industry
      • Shop All Machines

      Want to see the entire machine lineup?

      VIEW PRICE LIST >Price List
      Build & Price

      Need help finding the right machine?

      LET US GUIDE YOU >Build & Price
      SHOPPING TOOLS
      • Build & Price a Haas
      • Price List
      • Available Inventory
      • CNCA Financing
      WANT TO TALK TO SOMEONE?

      A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.

      CONTACT YOUR DISTRIBUTOR >
  • Why Haas
  • Service
    • Alarm Quick Search
      ALARM QUICK SEARCH

      Enter the alarm code to find related troubleshooting and how-to guides.

      No matching alarm was found for the given alarm code.
      No matching alarm was found for the given alarm code.
      search
    • Troubleshooting Guides and How-To Procedures
      • Product Image
        Troubleshooting Guides
      • Product Image
        How To Procedures
    • Manuals
      • Product Image
        Operator Manuals
  • Videos

    • Tip of the Day
      • Tip of the Day
      • In-Process Part Measurement; Probing in 5 Simple Steps
      • How To Calculate Speeds and Feeds (Inch Version)
      • How To Calculate Speeds and Feeds (Metric Version)
      • Are You Protecting Your Hearing?
      • Lathe Part Stop Essentials
      • ER Collet Essentials
      • Output Your Machine Data for Analysis
      • View Your Haas Control From Your Computer or Phone
      • Run More Than One Part at a Time
      • Use M99 to Loop, Jump, and Return
      • Avoid Chatter on Your Mill
      • Mark's Greatest Setup Tips
      • What Does That Icon Mean?
      • Master the Haas Side-Mount Tool Changer
      • G82 Dwell Time Explained
      • Peck Drilling Essentials
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Use G53, not G28, to Cut Cycle Times and Position Your Lathe Turret
      • Use G53 Instead of G28 to Send Your Haas Mill to Home Position
      • Drilling on a Haas Lathe: Everything You Need to Know
      • Reduce Your Coolant Carryout
      • How to Stop Your Program With an M-Code
      • How to Start A Job in the Middle of The Program
      • Programmable Coolant Tricks You Didn’t Know About
      • Display Pictures and Videos on Your Haas Control Using M130
      • How to: Set Tool Length and Work Offsets
      • Machine Your Own Gifts on Your Haas!
      • How to: Manually Pick Up a Bore or a Hole with an Indicator
      • How to: Set a Work Offset with an Edge Finder and Indicator
      • Setting up a Right-Angle Head; G17, G18, G19 Explained
      • Machining Magic: Rotate Your Part with G68
      • Haas Tip of the Day – LIVE from IMTS 2016 in Chicago!
      • Quickly Pick Up a Work Offset and an Angle With Your Probe
      • Simplify 3+2 and 5-Axis Machining with DWO/TCPC
      • Set Up Live Tools Properly on Your Haas Lathe
      • Solution for Stringy Chips Wrapped Wound Your Tools
      • How to plot your cutting path and clamp locations
      • Troubleshoot your lathe G71 and G72 roughing cycles quickly
      • Troubleshoot Your Haas Probe, Part 2
      • Troubleshoot Your Haas Probe, Part 1
      • What is G-Code?
      • Easily Program a Tap in Metric Mode on your Haas VMC
      • How to Square and Indicate a Vise on Your CNC Mill
      • Easily Program a Tap in Inch Mode on your Haas VMC
      • Reduce Setup Time with the Haas “Next Tool” Button
      • Simple Peck Tapping Using a G84 Tapping Cycle
      • Save Time on Your Haas Mill by Pre-Staging Tools!
      • Command a safe tool change position to avoid fixtures
      • Easily Create Your Own Custom M and G Codes
      • Avoid Disaster Using the Haas Single Block Function
      • How Canned Cycles Work with G98 & G99
      • Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
      • Unwind Your Haas Rotary Back to Zero Quickly
      • Easily Convert Your MDI Program to Memory
      • Boost Lathe Productivity with a Bar Puller and Macros
      • Limiting Block Look-Ahead when using Macros
      • Display the Axes You Want to See on Your Haas Control
      • Quick and Easy Backup of your Haas CNC Programs
      • Haas Control programming shortcuts
      • Easily keep track of your parts using the Haas M30 counters
      • Customize your Haas control home screen
      • Bring your tools to you with the Second Home option
      • Easy Cylindrical Engraving & Machining with G47/G107
      • Easily Engrave Sequential Serial Numbers – G47 Part 2
      • CNC Engraving Made Easy Using G47 – Part 1
      • Copy Your CNC Programs Quickly and Easily
      • How to Take a Screenshot on Your Haas Control
      • Faster Tapping with Setting 130

    • Machines and Options
      • Machines and Options
      • HaasBuilt - DT-2
      • Through-Tool Air Blast - Haas Automation Option Spotlight
      • Haas Bar Feeder - Haas Automation Option Spotlight
      • High-Intensity-Lighting forMills - Haas Automation Option Spotlight
      • High-Intensity-Lighting for Lathes - Haas Automation Option Spotlight
      • P-COOL - Haas Automation Option Spotlight
      • HaasBuilt - VF-12
      • HaasBuilt - CM-1
      • Wireless Probing How-To PART 3 - Tool Offset Page
      • Wireless Probing How-To PART 2 - Set Tool Offsets with VPS
      • Wireless Probing How-To PART 1 - Calibrating the System
      • Don't Fear 5-Axis - Episode 1
      • Don't Fear 5-Axis - Episode 2
      • Through-Spindle Coolant - Haas How It Works
      • Chip Auger - Option Spotlight
      • Multi-Auger Chip Conveyor - Option Spotlight
      • Through-Spindle Coolant for Haas Mills
      • The Haas TM-1
      • High-Speed Machining for Haas Mills
      • HaasBuilt - ST-15
      • HaasBuilt - HRT210
      • CL-1 Operators Guide
      • The Haas CL-1 Chucker Lathe
      • The Haas 30-Pocket Side-Mount Tool Changer
      • HaasBuilt - VF-2
      • VMC Comparison: VF-2, VF-2SS & DM-2
      • HaasBuilt - UMC-750
      • The Haas Minimum Quantity Lubrication System
      • The New Haas Bar Feeder: Quick Look
      • Introduction to the New DM-1 - Haas Automation
      • The Automatic Coolant Refill System
      • The Benefits of the Haas "Index-on-the-fly" Feature
      • The New Haas Mini Mill
      • The Advantages of Through-Spindle Coolant
      • Run, Stop, Jog and Continue
      • The Haas Enclosure Exhaust System
      • Haas Dual Spindle Lathes Simplified
      • The Redesigned EC-1600 Horizontal Machining Center
      • Through Tool Air blasts chips away during dry machining
      • The Next Generation Control: HaasConnect
      • The New Haas DM-2 and DT-2
      • WIPS - The Haas Wireless Intuitive Probing System
      • The Haas TRT100 Dual-Axis Rotary
      • Electronic Handwheels for Haas Toolroom Lathes
      • The BMT65 Turret and Live Tooling for Haas Lathes
      • Haas VMC: Chip Clearing and Tool Lubrication

    • Tips & Tricks
      • Tips & Tricks
      • Set lathe tool offsets with the Automatic Tool Presetter
      • Spindle Speed Variation - Stop chatter on your CNC lathe
      • 4 Steps to filling the coolant tank on your Haas CNC machine
      • The Tap Recovery Feature
      • Haas VMC: Chip Clearing and Tool Lubrication
      • How to use the Tailstock on a Haas Lathe
      • Machine Tool Coolant: Cleaning Your Tank
      • Machine Tool Coolant: Topping Up a High Concentration
      • Machine Tool Coolant: Topping Up a Low Concentration
      • Machine Tool Coolant: Making a New Batch
      • Machine Tool Coolant: Tools of Coolant
      • Chuck Installation Guide
      • How to Properly Cut Lathe Soft Jaws — Part 2
      • How to Properly Cut Lathe Soft Jaws — Part 1
      • Haas DXF Import — How To
      • Haas Control — GUI Setup, Run, and Edit
      • Haas Automatic Tool Presetter — How To
      • Haas Setup and Run Modes — How To
      • Haas Advanced Tool Management — How To
      • Haas Program Optimizer — How To
      • Haas Offset Filtering — How To
      • Haas Wireless Intuitive Probing System — How To

    • Shop Tips
      • Shop Tips
      • Lean Manufacturing - Create Your Own WIP Racks
      • Lean Manufacturing - Organizing Drawers
      • Lean Manufacturing - Shop Tour
      • Upgrade Your Floppy Drive to USB
      • Tool Touch-Off Gage

    • Answer Man
      • Answer Man
      • Get More Productive With Haas Rotary Accessories
      • Zero-Return a Single Axis on Your Haas Mill
      • Display Messages on Your NextGen Control
      • Clear Coolant from Your Windows with Window Blast
      • Put Your Haas Machine to Bed
      • Where’s My Tool?
      • Try Out a Haas Option for FREE
      • Connect Your Haas Machine to the Internet

    • Product Info
      • Product Info
      • ER Collet Essentials
      • Mark's Greatest Setup Tips
      • What Does That Icon Mean?
      • Master the Haas Side-Mount Tool Changer
      • G82 Dwell Time Explained
      • Peck Drilling Essentials
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Use G53, not G28, to Cut Cycle Times and Position Your Lathe Turret
      • Use G53 Instead of G28 to Send Your Haas Mill to Home Position
      • Drilling on a Haas Lathe: Everything You Need to Know
      • Reduce Your Coolant Carryout
      • How to Stop Your Program With an M-Code
      • How to Start A Job in the Middle of The Program
      • Programmable Coolant Tricks You Didn’t Know About
      • Display Pictures and Videos on Your Haas Control Using M130
      • How to: Set Tool Length and Work Offsets
      • Machine Your Own Gifts on Your Haas!
      • How to: Manually Pick Up a Bore or a Hole with an Indicator
      • How to: Set a work offset with an edge finder and indicator
      • Setting up a Right-Angle Head; G17, G18, G19 Explained
      • Machining Magic: Rotate Your Part with G68
      • Haas Tip of the Day – LIVE from IMTS 2016 in Chicago!
      • Quickly Pick Up a Work Offset and an Angle With Your Probe
      • Simplify 3+2 and 5-Axis Machining with DWO/TCPC
      • Set Up Live Tools Properly on Your Haas Lathe
      • Solution for stringy chips wrapped around your tools
      • How to plot your cutting path and clamp locations
      • Troubleshoot your lathe G71 and G72 roughing cycles quickly
      • Troubleshoot Your Haas Probe, Part 2
      • Troubleshoot Your Haas Probe, Part 1
      • What is G-Code?
      • Easily Program a Tap in Metric Mode on your Haas VMC
      • How to Square and Indicate a Vise on Your CNC Mill
      • Easily Program a Tap in Inch Mode on your Haas VMC
      • Reduce Setup Time with the Haas “Next Tool” Button
      • Simple Peck Tapping Using a G84 Tapping Cycle
      • Save Time on Your Haas Mill by Pre-Staging Tools!
      • Command a safe tool change position to avoid fixtures
      • Easily Create Your Own Custom M and G Codes
      • Avoid Disaster Using the Haas Single Block Function
      • How Canned Cycles Work with G98 & G99
      • Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
      • Unwind Your Haas Rotary Back to Zero Quickly
      • Easily Convert Your MDI Program to Memory
      • Boost Lathe Productivity with a Bar Puller and Macros
      • Limiting Block Look-Ahead when using Macros
      • Display the Axes You Want to See on Your Haas Control
      • Quick and Easy Backup of your Haas CNC Programs
      • Haas Control programming shortcuts
      • Easily keep track of your parts using the Haas M30 counters
      • Customize your Haas control home screen
      • Bring your tools to you with the Second Home option
      • Easy Cylindrical Engraving & Machining with G47/G107
      • Easily Engrave Sequential Serial Numbers – G47 Part 2
      • CNC Engraving Made Easy Using G47 – Part 1
      • Copy Your CNC Programs Quickly and Easily
      • How to Take a Screenshot on Your Haas Control
      • Faster Tapping with Setting 130

    • Cutting Demos
      • Cutting Demos
      • VF-4 and TR200Y Cutting Demo
      • ST-20Y Cutting Demo
      • CM-1 and TRT70 Cutting Demo
      • DS-30Y Cutting Demo
      • ST-55 Cutting Demo
      • VF-2SS Cutting Demo
      • Haas VF-6/50 Cutting Demo
      • Haas VF-2SS & HRC210 Demo
      • Haas UMC-750: Oilfield Drill Bit Cone Demo
      • Haas UMC-750 First Look
      • Haas ST-10Y Demo
      • Haas ST-40 Demo
      • Haas ST-30 Demo
      • Haas ST-10 Demo
      • Haas ST-20Y Demo
      • Introducing the Haas CL-1

    • Coolant Series
      • Coolant Series
      • Coolant Simplified
      • Cleaning Your Machine Tool Coolant Tank
      • Topping Up a High Concentration
      • Topping Up a Low Concentration
      • Identify correct concentrations of coolant
      • Tools of Coolant

    • Surface Finish
      • Surface Finish
      • Mark's Greatest Setup Tips
      • ER Collet Essentials
      • What Does That Icon Mean?
      • Master the Haas Side-Mount Tool Changer
      • G82 Dwell Time Explained
      • Peck Drilling Essentials
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Use G53, not G28, to Cut Cycle Times and Position Your Lathe Turret
      • Use G53 Instead of G28 to Send Your Haas Mill to Home Position
      • Drilling on a Haas Lathe: Everything You Need to Know
      • Reduce Your Coolant Carryout
      • How to Stop Your Program With an M-Code
      • How to Start A Job in the Middle of The Program
      • Programmable Coolant Tricks You Didn’t Know About
      • Display Pictures and Videos on Your Haas Control Using M130
      • How to: Set Tool Length and Work Offsets
      • Machine Your Own Gifts on Your Haas!
      • How to: Manually Pick Up a Bore or a Hole with an Indicator
      • How to: Set a work offset with an edge finder and indicator
      • Setting up a Right-Angle Head; G17, G18, G19 Explained
      • Machining Magic: Rotate Your Part with G68
      • Haas Tip of the Day – LIVE from IMTS 2016 in Chicago!
      • Quickly Pick Up a Work Offset and an Angle With Your Probe
      • Simplify 3+2 and 5-Axis Machining with DWO/TCPC
      • Set Up Live Tools Properly on Your Haas Lathe
      • Solution for stringy chips wrapped around your tools
      • How to plot your cutting path and clamp locations
      • Troubleshoot your lathe G71 and G72 roughing cycles quickly
      • Troubleshoot Your Haas Probe, Part 2
      • Troubleshoot Your Haas Probe, Part 1
      • What is G-Code?
      • Easily Program a Tap in Metric Mode on your Haas VMC
      • How to Square and Indicate a Vise on Your CNC Mill
      • Easily Program a Tap in Inch Mode on your Haas VMC
      • Reduce Setup Time with the Haas “Next Tool” Button
      • Simple Peck Tapping Using a G84 Tapping Cycle
      • Save Time on Your Haas Mill by Pre-Staging Tools!
      • Command a safe tool change position to avoid fixtures
      • Easily Create Your Own Custom M and G Codes
      • Avoid Disaster Using the Haas Single Block Function
      • How Canned Cycles Work with G98 & G99
      • Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
      • Unwind Your Haas Rotary Back to Zero Quickly
      • Easily Convert Your MDI Program to Memory
      • Boost Lathe Productivity with a Bar Puller and Macros
      • Limiting Block Look-Ahead when using Macros
      • Display the Axes You Want to See on Your Haas Control
      • Quick and Easy Backup of your Haas CNC Programs
      • Haas Control programming shortcuts
      • Easily keep track of your parts using the Haas M30 counters
      • Customize your Haas control home screen
      • Bring your tools to you with the Second Home option
      • Easy Cylindrical Engraving & Machining with G47/G107
      • Easily Engrave Sequential Serial Numbers – G47 Part 2
      • CNC Engraving Made Easy Using G47 – Part 1
      • Copy Your CNC Programs Quickly and Easily
      • How to Take a Screenshot on Your Haas Control
      • Faster Tapping with Setting 130

    • Service & Maintenance
      • Service & Maintenance
      • Haas Digital Presence
      • Alarm 9973 Unstable Incoming Power
      • What You Need to Know About Your CL-1 5C Collet
      • Is Your St-10/15 Tailstock Sticking?
      • Water in Your Air System? Setting 242/243
      • Haas Umbrella-Style Tool Changer - CT vs. BT Carousel Configurations
      • Servo Amplifier Troubleshooting
      • Solenoid Running Hot?
      • Spindle Troubleshooting
      • Daily Machine Maintenance
      • Troubleshoot Pneumatic Door Locks
      • Fix a Tailstock Pressure Gauge
      • Balance Your Spindle
      • Fix an Enclosure Leak
      • The Proper Way to Tighten Tools on Your Haas BMT Turret
      • Replace the filter on your auxiliary coolant system - Part 1
      • Replace the filter on your auxiliary coolant system - Part 2
      • Replacing the Window on Your Haas Lathe
      • Umbrella/Carousel Tool Changer Maintenance
      • Side Mount Tool Changer Double Arm Maintenance
      • Tool Changer Recovery; Haas Side Mount Tool Changer
      • Tool Changer Recovery; Umbrella-Style Tool Changer
      • Replace a Tool Pocket on Your Haas Side Mount Tool Changer
      • Solenoid and Air System Troubleshooting
      • Proximity Switch Overview and Troubleshooting
      • Run the Spindle Warm-Up Program for Longer Spindle Life
      • What To Do if Your Lathe is Cutting a Taper
      • Haas Lathe Hydraulic Power Unit (HPU) Troubleshooting
      • Main Processor Battery Replacement
      • The Height of Your Machine is Critical
      • Troubleshooting Your Spindle Encoder
      • Why Every Tech Needs an Inductive Voltage Sensor
      • Correct Machine Phase to Fix Your Coolant Pump
      • Improve Surface Finish with Correct Chuck Pressure
      • Work Light Phasing With Spindle RPM

    • Eliminate Chatter
      • Eliminate Chatter
      • Avoid Chatter on Your Mill
      • Reduce Chatter
      • Reduce Chatter
      • Reduce Chatter
      • Reduce Chatter
      • Reduce Chatter

    • Operator Tips
      • Operator Tips
      • Properly Cut Lathe Soft Jaws - Part 1
      • Properly Cut Lathe Soft Jaws - Part 2
      • Faster Lathe Tool Changes
      • Stop Lathe Chatter
      • Chuck Installation Guide
      • How to Choose the Proper ER Collet
      • The Proper Way to Tighten Tools on Your Haas BMT Turret
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Don't Waste Time Peck Drilling
      • Use G53 Instead of G28
      • Haas Programmable Coolant Tricks
      • Stringy Chips Wrapped Around Your Tool?

    • Chip Making
      • Chip Making
      • Mark's Greatest Setup Tips
      • ER Collet Essentials
      • What Does That Icon Mean?
      • Master the Haas Side-Mount Tool Changer
      • G82 Dwell Time Explained
      • Peck Drilling Essentials
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Use G53, not G28, to Cut Cycle Times and Position Your Lathe Turret
      • Use G53 Instead of G28 to Send Your Haas Mill to Home Position
      • Drilling on a Haas Lathe: Everything You Need to Know
      • Reduce Your Coolant Carryout
      • How to Stop Your Program With an M-Code
      • How to Start A Job in the Middle of The Program
      • Programmable Coolant Tricks You Didn’t Know About
      • Display Pictures and Videos on Your Haas Control Using M130
      • How to: Set Tool Length and Work Offsets
      • Machine Your Own Gifts on Your Haas!
      • How to: Manually Pick Up a Bore or a Hole with an Indicator
      • How to: Set a work offset with an edge finder and indicator
      • Setting up a Right-Angle Head; G17, G18, G19 Explained
      • Machining Magic: Rotate Your Part with G68
      • Haas Tip of the Day – LIVE from IMTS 2016 in Chicago!
      • Quickly Pick Up a Work Offset and an Angle With Your Probe
      • Simplify 3+2 and 5-Axis Machining with DWO/TCPC
      • Set Up Live Tools Properly on Your Haas Lathe
      • Solution for stringy chips wrapped around your tools
      • How to plot your cutting path and clamp locations
      • Troubleshoot your lathe G71 and G72 roughing cycles quickly
      • Troubleshoot Your Haas Probe, Part 2
      • Troubleshoot Your Haas Probe, Part 1
      • What is G-Code?
      • Easily Program a Tap in Metric Mode on your Haas VMC
      • How to Square and Indicate a Vise on Your CNC Mill
      • Easily Program a Tap in Inch Mode on your Haas VMC
      • Reduce Setup Time with the Haas “Next Tool” Button
      • Simple Peck Tapping Using a G84 Tapping Cycle
      • Save Time on Your Haas Mill by Pre-Staging Tools!
      • Command a safe tool change position to avoid fixtures
      • Easily Create Your Own Custom M and G Codes
      • Avoid Disaster Using the Haas Single Block Function
      • How Canned Cycles Work with G98 & G99
      • Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
      • Unwind Your Haas Rotary Back to Zero Quickly
      • Easily Convert Your MDI Program to Memory
      • Boost Lathe Productivity with a Bar Puller and Macros
      • Limiting Block Look-Ahead when using Macros
      • Display the Axes You Want to See on Your Haas Control
      • Quick and Easy Backup of your Haas CNC Programs
      • Haas Control programming shortcuts
      • Easily keep track of your parts using the Haas M30 counters
      • Customize your Haas control home screen
      • Bring your tools to you with the Second Home option
      • Easy Cylindrical Engraving & Machining with G47/G107
      • Easily Engrave Sequential Serial Numbers – G47 Part 2
      • CNC Engraving Made Easy Using G47 – Part 1
      • Copy Your CNC Programs Quickly and Easily
      • How to Take a Screenshot on Your Haas Control
      • Faster Tapping with Setting 130

    • Machine Service
      • Machine Service
      • Mark's Greatest Setup Tips
      • ER Collet Essentials
      • What Does That Icon Mean?
      • Master the Haas Side-Mount Tool Changer
      • G82 Dwell Time Explained
      • Peck Drilling Essentials
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Use G53, not G28, to Cut Cycle Times and Position Your Lathe Turret
      • Use G53 Instead of G28 to Send Your Haas Mill to Home Position
      • Drilling on a Haas Lathe: Everything You Need to Know
      • Reduce Your Coolant Carryout
      • How to Stop Your Program With an M-Code
      • How to Start A Job in the Middle of The Program
      • Programmable Coolant Tricks You Didn’t Know About
      • Display Pictures and Videos on Your Haas Control Using M130
      • How to: Set Tool Length and Work Offsets
      • Machine Your Own Gifts on Your Haas!
      • How to: Manually Pick Up a Bore or a Hole with an Indicator
      • How to: Set a work offset with an edge finder and indicator
      • Setting up a Right-Angle Head; G17, G18, G19 Explained
      • Machining Magic: Rotate Your Part with G68
      • Haas Tip of the Day – LIVE from IMTS 2016 in Chicago!
      • Quickly Pick Up a Work Offset and an Angle With Your Probe
      • Simplify 3+2 and 5-Axis Machining with DWO/TCPC
      • Set Up Live Tools Properly on Your Haas Lathe
      • Solution for stringy chips wrapped around your tools
      • How to plot your cutting path and clamp locations
      • Troubleshoot your lathe G71 and G72 roughing cycles quickly
      • Troubleshoot Your Haas Probe, Part 2
      • Troubleshoot Your Haas Probe, Part 1
      • What is G-Code?
      • Easily Program a Tap in Metric Mode on your Haas VMC
      • How to Square and Indicate a Vise on Your CNC Mill
      • Easily Program a Tap in Inch Mode on your Haas VMC
      • Reduce Setup Time with the Haas “Next Tool” Button
      • Simple Peck Tapping Using a G84 Tapping Cycle
      • Save Time on Your Haas Mill by Pre-Staging Tools!
      • Command a safe tool change position to avoid fixtures
      • Easily Create Your Own Custom M and G Codes
      • Avoid Disaster Using the Haas Single Block Function
      • How Canned Cycles Work with G98 & G99
      • Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
      • Unwind Your Haas Rotary Back to Zero Quickly
      • Easily Convert Your MDI Program to Memory
      • Boost Lathe Productivity with a Bar Puller and Macros
      • Limiting Block Look-Ahead when using Macros
      • Display the Axes You Want to See on Your Haas Control
      • Quick and Easy Backup of your Haas CNC Programs
      • Haas Control programming shortcuts
      • Easily keep track of your parts using the Haas M30 counters
      • Customize your Haas control home screen
      • Bring your tools to you with the Second Home option
      • Easy Cylindrical Engraving & Machining with G47/G107
      • Easily Engrave Sequential Serial Numbers – G47 Part 2
      • CNC Engraving Made Easy Using G47 – Part 1
      • Copy Your CNC Programs Quickly and Easily
      • How to Take a Screenshot on Your Haas Control
      • Faster Tapping with Setting 130

    • Machine Maintenance
      • Machine Maintenance
      • Mark's Greatest Setup Tips
      • ER Collet Essentials
      • What Does That Icon Mean?
      • Master the Haas Side-Mount Tool Changer
      • G82 Dwell Time Explained
      • Peck Drilling Essentials
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Use G53, not G28, to Cut Cycle Times and Position Your Lathe Turret
      • Use G53 Instead of G28 to Send Your Haas Mill to Home Position
      • Drilling on a Haas Lathe: Everything You Need to Know
      • Reduce Your Coolant Carryout
      • How to Stop Your Program With an M-Code
      • How to Start A Job in the Middle of The Program
      • Programmable Coolant Tricks You Didn’t Know About
      • Display Pictures and Videos on Your Haas Control Using M130
      • How to: Set Tool Length and Work Offsets
      • Machine Your Own Gifts on Your Haas!
      • How to: Manually Pick Up a Bore or a Hole with an Indicator
      • How to: Set a work offset with an edge finder and indicator
      • Setting up a Right-Angle Head; G17, G18, G19 Explained
      • Machining Magic: Rotate Your Part with G68
      • Haas Tip of the Day – LIVE from IMTS 2016 in Chicago!
      • Quickly Pick Up a Work Offset and an Angle With Your Probe
      • Simplify 3+2 and 5-Axis Machining with DWO/TCPC
      • Set Up Live Tools Properly on Your Haas Lathe
      • Solution for stringy chips wrapped around your tools
      • How to plot your cutting path and clamp locations
      • Troubleshoot your lathe G71 and G72 roughing cycles quickly
      • Troubleshoot Your Haas Probe, Part 2
      • Troubleshoot Your Haas Probe, Part 1
      • What is G-Code?
      • Easily Program a Tap in Metric Mode on your Haas VMC
      • How to Square and Indicate a Vise on Your CNC Mill
      • Easily Program a Tap in Inch Mode on your Haas VMC
      • Reduce Setup Time with the Haas “Next Tool” Button
      • Simple Peck Tapping Using a G84 Tapping Cycle
      • Save Time on Your Haas Mill by Pre-Staging Tools!
      • Command a safe tool change position to avoid fixtures
      • Easily Create Your Own Custom M and G Codes
      • Avoid Disaster Using the Haas Single Block Function
      • How Canned Cycles Work with G98 & G99
      • Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
      • Unwind Your Haas Rotary Back to Zero Quickly
      • Easily Convert Your MDI Program to Memory
      • Boost Lathe Productivity with a Bar Puller and Macros
      • Limiting Block Look-Ahead when using Macros
      • Display the Axes You Want to See on Your Haas Control
      • Quick and Easy Backup of your Haas CNC Programs
      • Haas Control programming shortcuts
      • Easily keep track of your parts using the Haas M30 counters
      • Customize your Haas control home screen
      • Bring your tools to you with the Second Home option
      • Easy Cylindrical Engraving & Machining with G47/G107
      • Easily Engrave Sequential Serial Numbers – G47 Part 2
      • CNC Engraving Made Easy Using G47 – Part 1
      • Copy Your CNC Programs Quickly and Easily
      • How to Take a Screenshot on Your Haas Control
      • Faster Tapping with Setting 130

    • Chip Removal
      • Chip Removal
      • Mark's Greatest Setup Tips
      • ER Collet Essentials
      • What Does That Icon Mean?
      • Master the Haas Side-Mount Tool Changer
      • G82 Dwell Time Explained
      • Peck Drilling Essentials
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Use G53, not G28, to Cut Cycle Times and Position Your Lathe Turret
      • Use G53 Instead of G28 to Send Your Haas Mill to Home Position
      • Drilling on a Haas Lathe: Everything You Need to Know
      • Reduce Your Coolant Carryout
      • How to Stop Your Program With an M-Code
      • How to Start A Job in the Middle of The Program
      • Programmable Coolant Tricks You Didn’t Know About
      • Display Pictures and Videos on Your Haas Control Using M130
      • How to: Set Tool Length and Work Offsets
      • Machine Your Own Gifts on Your Haas!
      • How to: Manually Pick Up a Bore or a Hole with an Indicator
      • How to: Set a work offset with an edge finder and indicator
      • Setting up a Right-Angle Head; G17, G18, G19 Explained
      • Machining Magic: Rotate Your Part with G68
      • Haas Tip of the Day – LIVE from IMTS 2016 in Chicago!
      • Quickly Pick Up a Work Offset and an Angle With Your Probe
      • Simplify 3+2 and 5-Axis Machining with DWO/TCPC
      • Set Up Live Tools Properly on Your Haas Lathe
      • Solution for stringy chips wrapped around your tools
      • How to plot your cutting path and clamp locations
      • Troubleshoot your lathe G71 and G72 roughing cycles quickly
      • Troubleshoot Your Haas Probe, Part 2
      • Troubleshoot Your Haas Probe, Part 1
      • What is G-Code?
      • Easily Program a Tap in Metric Mode on your Haas VMC
      • How to Square and Indicate a Vise on Your CNC Mill
      • Easily Program a Tap in Inch Mode on your Haas VMC
      • Reduce Setup Time with the Haas “Next Tool” Button
      • Simple Peck Tapping Using a G84 Tapping Cycle
      • Save Time on Your Haas Mill by Pre-Staging Tools!
      • Command a safe tool change position to avoid fixtures
      • Easily Create Your Own Custom M and G Codes
      • Avoid Disaster Using the Haas Single Block Function
      • How Canned Cycles Work with G98 & G99
      • Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
      • Unwind Your Haas Rotary Back to Zero Quickly
      • Easily Convert Your MDI Program to Memory
      • Boost Lathe Productivity with a Bar Puller and Macros
      • Limiting Block Look-Ahead when using Macros
      • Display the Axes You Want to See on Your Haas Control
      • Quick and Easy Backup of your Haas CNC Programs
      • Haas Control programming shortcuts
      • Easily keep track of your parts using the Haas M30 counters
      • Customize your Haas control home screen
      • Bring your tools to you with the Second Home option
      • Easy Cylindrical Engraving & Machining with G47/G107
      • Easily Engrave Sequential Serial Numbers – G47 Part 2
      • CNC Engraving Made Easy Using G47 – Part 1
      • Copy Your CNC Programs Quickly and Easily
      • How to Take a Screenshot on Your Haas Control
      • Faster Tapping with Setting 130

    • Programming Tips
      • Programming Tips
      • Lathe - Faster Part-Off
      • Mill - Thick to Thin Chips
      • Mill - Roll-In Technique

    • Coolant Management
      • Coolant Management
      • Mark's Greatest Setup Tips
      • ER Collet Essentials
      • What Does That Icon Mean?
      • Master the Haas Side-Mount Tool Changer
      • G82 Dwell Time Explained
      • Peck Drilling Essentials
      • Set Work Offsets in Seconds
      • Tool Offsets Explained
      • Use G53, not G28, to Cut Cycle Times and Position Your Lathe Turret
      • Use G53 Instead of G28 to Send Your Haas Mill to Home Position
      • Drilling on a Haas Lathe: Everything You Need to Know
      • Reduce Your Coolant Carryout
      • How to Stop Your Program With an M-Code
      • How to Start A Job in the Middle of The Program
      • Programmable Coolant Tricks You Didn’t Know About
      • Display Pictures and Videos on Your Haas Control Using M130
      • How to: Set Tool Length and Work Offsets
      • Machine Your Own Gifts on Your Haas!
      • How to: Manually Pick Up a Bore or a Hole with an Indicator
      • How to: Set a work offset with an edge finder and indicator
      • Setting up a Right-Angle Head; G17, G18, G19 Explained
      • Machining Magic: Rotate Your Part with G68
      • Haas Tip of the Day – LIVE from IMTS 2016 in Chicago!
      • Quickly Pick Up a Work Offset and an Angle With Your Probe
      • Simplify 3+2 and 5-Axis Machining with DWO/TCPC
      • Set Up Live Tools Properly on Your Haas Lathe
      • Solution for stringy chips wrapped around your tools
      • How to plot your cutting path and clamp locations
      • Troubleshoot your lathe G71 and G72 roughing cycles quickly
      • Troubleshoot Your Haas Probe, Part 2
      • Troubleshoot Your Haas Probe, Part 1
      • What is G-Code?
      • Easily Program a Tap in Metric Mode on your Haas VMC
      • How to Square and Indicate a Vise on Your CNC Mill
      • Easily Program a Tap in Inch Mode on your Haas VMC
      • Reduce Setup Time with the Haas “Next Tool” Button
      • Simple Peck Tapping Using a G84 Tapping Cycle
      • Save Time on Your Haas Mill by Pre-Staging Tools!
      • Command a safe tool change position to avoid fixtures
      • Easily Create Your Own Custom M and G Codes
      • Avoid Disaster Using the Haas Single Block Function
      • How Canned Cycles Work with G98 & G99
      • Use Your Insert Drill as a Boring Bar! 2 Operations from 1 Tool!
      • Unwind Your Haas Rotary Back to Zero Quickly
      • Easily Convert Your MDI Program to Memory
      • Boost Lathe Productivity with a Bar Puller and Macros
      • Limiting Block Look-Ahead when using Macros
      • Display the Axes You Want to See on Your Haas Control
      • Quick and Easy Backup of your Haas CNC Programs
      • Haas Control programming shortcuts
      • Easily keep track of your parts using the Haas M30 counters
      • Customize your Haas control home screen
      • Bring your tools to you with the Second Home option
      • Easy Cylindrical Engraving & Machining with G47/G107
      • Easily Engrave Sequential Serial Numbers – G47 Part 2
      • CNC Engraving Made Easy Using G47 – Part 1
      • Copy Your CNC Programs Quickly and Easily
      • How to Take a Screenshot on Your Haas Control
      • Faster Tapping with Setting 130

    • Metal Cutting Tips
      • Metal Cutting Tips
      • Broach on Your Lathe
      • Broach on Your Lathe
      • Broach on Your Lathe
      • Broach on Your Lathe
      • Broach on Your Lathe

    • Workholding
      • Workholding
      • ER Collet Essentials
      • Lathe Part Stop Essentials
      • How to Square and Indicate a Vise
      • 5-Axis Workholding
      • Fixturing, Diamond Pins
      • Fixturing, Diamond Pins
      • Fixturing, Diamond Pins
      • Fixturing, Diamond Pins

    • Cutting Tool Info
      • Cutting Tool Info
      • Basics of Drill Selection
      • Turning
      • Turning
      • Deep Hole Drilling
      • Deep Hole Drilling
      • Deep Hole Drilling
      • Indexable Drilling
      • Sharpen a Twist Drill By Hand
      • Shop All Machines

      Want to see the entire machine lineup?

      VIEW PRICE LIST >Price List
      Build & Price

      Need help finding the right machine?

      LET US GUIDE YOU >Build & Price
      SHOPPING TOOLS
      • Build & Price a Haas
      • Price List
      • Available Inventory
      • CNCA Financing
      WANT TO TALK TO SOMEONE?

      A Haas Factory Outlet (HFO) can answer your questions, and walk you through your best options.

      CONTACT YOUR DISTRIBUTOR >

    • Contact Us

Gallery

ST Series

  • Gallery
  • Features
  • Models
Build & Price
FIND DISTRIBUTOR
Haas Logo

KEEP UP WITH THE LATEST HAAS TIPS AND TECHNOLOGY...

Sign up now!   

  • Service & Support
  • Haas DIY Guide
  • Request Service
  • Operator Manuals
  • Replacement Parts
  • Machine Pre-Installation Guide
  • Rotary Repair Request
  • Shopping Tools
  • Build & Price a New Haas
  • Available Inventory
  • The Haas Price List
  • CNCA Financing
  • Rotary Fit Chart
  • About Haas
  • Careers
  • Certifications & Safety
  • Contact Us
  • History
  • Terms & Conditions
  • Privacy Policy | Cookie Policy
  • Visit the Factory
  • Warranty
  • Haas Community
  • Haas Motorsports
  • Gene Haas Foundation
  • HTEC Network
  • Events
  • Join the Conversation
  • Facebook
  • Twitter
  • Flickr
  • YouTube
  • LinkedIn
  • Instagram
© 2018 Haas Automation, Inc – CNC Machine Tools

2800 Sturgis Rd., Oxnard, CA 93030 / Toll Free: 800-331-6746
Phone: 805-278-1800 / Fax: 805-278-2255