Belt-Type Chip Conveyor, Lathe

   
Automatically removes chips from the machine

This heavy-duty steel, belt-type chip conveyor removes chips from the machine quickly, and discharges them at standard 55-gallon barrel height, with minimal coolant carryout. It is ideal for high-production machining applications, or when machining hard or abrasive materials. The conveyor can be activated via M-code, or directly from the control pendant, and there are settings to control the interval and duration of the conveyor cycle for automatic operation. Smart-sensing technology automatically reverses the conveyor if a jam occurs.

  • Heavy-duty steel belt-type chip conveyor
  • Activated via M-code, or from the control pendant
  • User settings to control cycle interval and duration for automatic operation
  • Automatic reversal upon torque overload situations

Belt-Type Chip Conveyor - Option Spotlight


Spend your time making chips, not cleaning them out of your machine. Our belt-type chip conveyor automatically removes chips from your machine, and discharges them at the height of a standard industrial barrel, with minimal coolant carryout. The belt-type chip conveyor can be turned on easily through your program, or straight from the control panel.

Chip Conveyor

Our belt-style chip conveyor automatically removes chips from the machine, while compressing them and wringing out the coolant. The chip chute’s lift angle minimizes coolant carryout, and discharges chips at the height of a standard industrial barrel.

  • Automatically reverses if a jam occurs
  • Activated via M-code, or from the control pendant
  • Settings control the interval and duration of operation
  • Automatic operation increases energy efficiency
  • Lift angle minimizes coolant carryout
  • Discharges at standard barrel height

Settings That Control Automatic Conveyor Operation

  • Setting 114 CONVEYOR CYCLE controls the interval at which the belt-style conveyor will start automatic operation during a cycle.
  • Setting 115 CONVEYOR ON-TIME controls the duration the belt-style conveyor) will run during automatic operation.
  • Setting 196 CONVEYOR SHUTOFF specifies the amount of time to wait without activity prior to stopping the conveyor.

NOTE: The operator doors must be closed to operate the belt-style conveyor.

Program Conveyor Operation

  • M31 starts the belt-style conveyor in the forward direction to remove chips. 
    • Once started, and the machine is in cycle, the conveyor will run for the time specified in Setting 115 CONVEYOR ON-TIME, and then shut off.
    • Once started, and the machine is in cycle, the conveyor will restart after the time in Setting 114 CONVEYOR CYCLE, and run for the time specified in Setting 115.
    • While the machine is in cycle, you can start the conveyor by pressing the [CHIP FWD] button on the keyboard. Once started, Settings 114 and 115 have the same effect as described above.
    • If Setting 114 is set to zero, automatic auger operation will not occur.
       
  • M33 stops all automatic conveyor operation while in cycle.
    • Manually stop the conveyor while in cycle by pressing the [CHIP STOP] button on the keyboard. This stops all automatic conveyor operation while in cycle.

Manual Operation

  • Press the [CHIP FWD] button on the keyboard to start the belt-style conveyor in the forward direction to remove chips. 
  • Press the [CHIP REV] button on the keyboard to start the auger belt-style conveyor in the reverse direction to clear a jam.
  • Press the [CHIP STOP] button on the keyboard to stop the belt-style conveyor.

Talk to Us

If you would like more information about how a new Haas machine can bring your products to life, please share your contact information.

All prices and specifications subject to change without notice. Freight, rigging, state & local taxes, vendor installation charges, and dealer installed accessories are not included. Not responsible for misprints or typographical errors. Machines shown with optional equipment. Actual product appearance may differ.