HAASTEC 2017

Get up to 12.5% off!

LEARN MORE

Create Your Own Deal

Get Up to 12.5% off Every* Machine

Through the end of 2017, we’re offering savings of 7.5% to 12.5% on every machine we make. Add a rotary table or bar feeder to your order, and you’ll lock in 12.5% savings on all machines. Savings are off the base prices of the machine, rotary, and bar feeder only. Additional savings may be available through your local HFO. *Not available on the Mini Mill-EDU.


Do More Than 3-Axis Machining


With a full line of Haas rotary products, including many specialized units designed for maximum productivity, Haas continues to lead the way to higher productivity through automation.

A Solid, Robust Design


Constructed of heavy-duty materials and designed for dependable day-in, day-out operation, Haas rotary products are the benchmark by which all others are measured. We manufacture all critical components in-house at our state-of-the-art California facility. At the core of every Haas rotary table is a large-diameter, aluminum-bronze worm gear meshing with a ground alloy steel worm (hardened to 60 Rc) submerged in a synthetic oil bath. To ensure indexing accuracy, we cut the worm gear while it’s attached to the spindle, rather than assembling the finished worm gear to the spindle, as other manufacturers do. Each assembled spindle is trammed-in on a CNC gear hobber to a maximum 2-micron runout, and then the worm gear is precision cut. This guarantees the utmost concentricity between the large-diameter ball bearings and the worm gear, ensuring many years of smooth, extremely accurate, and bind-free operation.

The Haas Control


All Haas rotary products are designed to integrate seamlessly with the control on your Haas mill. This means true simultaneous 4- or 5-axis motion, synchronized with the axes of your mill. Rotary setup is a simple plug-and-play process through the Haas Control, with on-screen instructions, and diagrams that are intuitive and easy to use. For standalone rotary operation, we also offer the Haas Servo Control. Activated by a single M-code, the Servo Control is easy to set up, and fully programmable.

Learn More

Multi-Axis Machining


Adding a rotary axis to a VMC is the fastest way to boost throughput and increase accuracy. Because Haas began as a rotary table manufacturer, we are able to provide the simplest and most cost-effective entry into 4th- and 5th axis machining available.

Learn More

Rotary Fixturing


Haas offers a wide selection workholding solutions for your 4th- and 5th-axis clamping needs, from compact air-collet closers to quick-change fixture plates to manual scroll chucks.

Learn More